Celestron TetraView 44349 Hızlı Başlangıç Kılavuzu - Sayfa 2
Mikroskop Celestron TetraView 44349 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Celestron TetraView 44349 2 sayfaları. Lcd digital microscope
Ayrıca Celestron TetraView 44349 için: Kullanım Kılavuzu (8 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar)
Sayfayı Yazdır
SPECIFICATIONS
Stage
Mechanical Stage 3.5 in x 3.5 in (88 mm x 88 mm)
5 MP ½.5" CMOS; 10x Magnifi cation in lieu of an eyepiece
Digital Camera
LCD Monitor
4.3 inch (109 mm) with 4x Digital Zoom —
Touch digital TFT display
Resolution — 480 x 272 pixels
Focuser
Dual — Coarse/Fine
Objectives
Glass — 4x, 10x 20x, 40x
Memory
8 GB SD Card (approximately 4, 500+ snapshots @ 5 MP)
LCD Rotation
180° – 90° left / 90° right
Filter Wheel
Red/Green/Blue/1 mm hole/3 mm hole/6 mm hole (default)
Nosepiece
Quad with click stop
Built-in electric — LED 6 Volt and 6 Watt
Illuminator
Condenser
N.A. 0.65
Input Universal 100 to 240 Volt 50/60HZ
AC Adapter
Batteries
User supplied 4 AA (optional - up to 3 hours usage)
67 oz/1.9 kg 7.0" (178 mm) x 5.5 in (140 mm) x 13.0 in (330 mm)
Weight/Dimensions
SETTING UP YOUR MICROSCOPE
1. Carefully remove the microscope and other parts from the carton and
set them on a table, desk, or other fl at surface.
2. Remove the plastic cover from the microscope.
3. Plug the small cable from the AC adapter into the socket on the back of the base
(see Figure 2).
4. Plug the adapter into the proper power source.
Battery Operation — You can use your microscope without AC power if you choose.
This gives you the freedom to operate the microscope outdoors or indoors, anywhere
you please. You'll need 4 AA batteries (user supplied). Open the battery door on the
bottom of the microscope and insert the batteries according to the battery polarity
shown in the battery compartment (Figure 3). After the batteries are installed, close the
battery door. Battery life will typically be three hours.
USING AN SD CARD
The TetraView
comes with a 8 GB SD card, which you can use to capture images (snapshot or video). SD cards are inserted into the SD
TM
card slot in the LCD monitor (Figure 1).
Product design and specifi cations are subject to change without prior notifi cation. This product is designed and intended for use by those 14 years of age and older.
© 2019 Celestron • All rights reserved • celestron.com/pages/technical-support
Telephone: 1(800) 421-9649 • 2835 Columbia Street • Torrance, CA 90503 USA
05-19
2
MAGNIFICATION (POWER)
MAGNIFICATION (POWER)
Use the following table to determine the magnifi cation
Use the following table to determine the magnifi cation
of the different objective lenses in combination with
of the different objective lenses in combination with
your microscope using the normal mode of the digital
your microscope using the normal mode of the digital
image on the LCD screen and using the digital zoom
image on the LCD screen and using the digital zoom
feature.
feature.
Objective Lens
Objective Lens
Objective Lens
4x
4x
4x
10x
10x
10x
Digital Image
Digital Image
Digital Image
40x 100x 200x 400x
40x 100x 200x 400x
40x 100x 200x 400x
Maximum with 4x
Maximum with 4x
digital zoom feature
digital zoom feature
digital zoom feature
160x 400x 800x 1600x
160x 400x 800x 1600x
160x 400x 800x 1600x
WORKING DISTANCE
WORKING DISTANCE
Objective Lens
Objective Lens
Objective Lens
4x
4x
4x
10x
10x
10x
Working
Working
Distance (mm) - est.
Distance (mm) - est.
Distance (mm) - est.
35.3 7.8
35.3 7.8
35.3 7.8
TOUCH PEN
You can keep the touch pen handy in the receptable behind
the Power ON/OFF button.
20x
20x
20x
40x
40x
40x
20x
20x
20x
40x
40x
40x
1.9
1.9
1.9
0.7
0.7
0.7
ON/OFF Button
Touch Pen
Fig 2
Fig 3