dB Technologies SYA 10 Hızlı Başlangıç Kullanım Kılavuzu - Sayfa 3

Konuşmacılar dB Technologies SYA 10 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kullanım Kılavuzu indirin. dB Technologies SYA 10 4 sayfaları.
Ayrıca dB Technologies SYA 10 için: Hızlı Başlangıç Kullanım Kılavuzu (3 sayfalar)

dB Technologies SYA 10 Hızlı Başlangıç Kullanım Kılavuzu
3) Connections, controls, first turn on
All the connections and controls are in the amplifier
panel side:
 
SYA 10 
www.dbtechnologies.com info@dbtechnologies‐aeb.com
CH1:
1–Audio Combo Input (for XLR or TRS connectors)
2–Line/Mic selector
3–Mic/Line Volume Control
CH2:
4–Audio Input (Balanced / TRS)
5–Line Volume control
CH3 (Bluetooth ):
6–BT status sync LED
7–BT Volume Control
MASTER SECTION
8–DSP Preset switch
9–Balanced audio output
10–Link/Mix switch
11–Master Volume with control LEDs
MAINS SECTION
12–VDE MAINS INPUT (with fuse)
13–ON-OFF SWITCH
a) Connect the audio input (1). The combo connector
allows a TRS or XLR connection. In case of a dynamic
microphone, plug it and select "Mic" in the Audio input
sensitivity switch (2). In the other cases check that the
switch is set on "Line". Adjust the level of Volume (3).
b) Connect a second input, depending on the kind of
connection (XLR/TRS), then adjust the related volume
level.
c) If needed, enable with the switch (7) the Bluetooth
receiver. Pair it with a visible device (ex. a MP3 reader).
d) If you need to link SYA 10 to another one, please use
a cable with XLR connectors (not supplied). Connect
the Link output (9) of the first, to the balanced Input
(1) of the second one. In the second loudspeaker,
please check that Selector (2) is set on "Line" position
and that Volume (3) is set to the correct value.
e) Set properly the DSP preset switch (8), choosing
between "Playback", "Flat", Bass Boost" or "Wedge"
configuration.
e) Plug properly the mains VDE input cable (supplied)
in the related input (12). Check that the audio source is
set on the minimum level. Then switch the POWER
switch (13) to "ON" position. Increase gradually the
volume of the audio source to the desired level.
Check the site
information, for added accessories and for the
complete user manual!
 
www.dbtechnologies.com
Rev 1.1 cod. 420120308Q 
 
for further