ActivePure Beyond Guardian Hızlı Başlangıç Kılavuzu - Sayfa 6

Hava Temizleyici ActivePure Beyond Guardian için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ActivePure Beyond Guardian 9 sayfaları.

Sayfayı Yazdır

CHANGING THE FILTERS

Disconnect power before changing filter.

CAUTION

STEP 1:

Open the front door from

the right hand side.

ACTIVEPURE

CELL REPLACEMENT INSTRUCTIONS

The following instructions will permit the unit's ActivePure

professional environment.

Step 1:

Always disconnect (unplug) device from electrical power source before replacing the ActivePure

Step 2: If necessary, relocate the device to an appropriate area to perform cell replacement. Do not replace

cell in areas where exposure may occur.

Step 3: Remove the 4 screws securing the old cell mounting plate on the device.

Step 4: Slide the old cell out of the device and disconnect the bulb socket.

Step 5: Open the replacement cell carton and remove the new cell.

Step 6:

Place old cell inside the empty new cell carton and dispose of properly.

NOTE:

No special handling for contaminants is necessary as the cell is on the exhaust side of the device and

does not trap or contain contaminants.

Step 7: Reattach the bulb connection to the new cell.

Step 8: Slide the new cell back inside the device and secure with the 4 screws removed in Step 3.

Step 9: Plug device in and reset the ActivePure

button for 4 ~ 5 seconds until it goes out.

Step 10: The device is now ready to be returned to its location.

REPLACEMENT PARTS & SERVICE

Use only replacement part recommended by the manufacturer.

WARNING

REPLACEMENT PARTS (QTY)

ActivePure

HEPA Filter (1)

ActivePure

Cell/Bulb (1)

To order replacement parts, contact your sales representative or ActivePure

STEP 2:

Remove old filter.

Cell Change Light by pressing and holding the power

for further assistance at 800.572.1446 or email [email protected].

STEP 3:

Clean ion chamber.

Cell to be safely replaced without creating safety concerns in your

Part Number

49949

50086

STEP 4:

Replace with new ActivePure

HEPA particle filter.

Cell

Customer Service

STEP 5:

Close front door.