ActivePure Surface & Air Guardian Manuel - Sayfa 11
Hava Temizleyici ActivePure Surface & Air Guardian için çevrimiçi göz atın veya pdf Manuel indirin. ActivePure Surface & Air Guardian 14 sayfaları.
Ayrıca ActivePure Surface & Air Guardian için: Manuel (16 sayfalar)
Sayfayı YazdırTROUBLESHOOTING
INDICATORS OF OPERATION
When the unit is on, the LED display will show either the fan setting and A·PURE, A·PURE x2, or Ion.
TROUBLESHOOTING - WHAT TO LOOK FOR FIRST.
1. I have plugged in the unit, pressed the ON button on the ActivePure
•
Make sure the power cord is inserted completely into the receptacle on the back of the unit
•
Make sure the electrical outlet is capable of providing power to the unit
2. The UV Lamp is not functioning/I'm getting a "Replace ActivePure
•
Check ActivePure
Cell for proper installation
®
•
Replace the ActivePure
3. What are the most typical application problems?
•
Symptom: A belief that the proper equipment is placed in the environment and the equipment appears unsuccessful
Problem: Lack of air movement, improper placement of the unit
•
Symptom: Visual haze of smoke and/or particulate remain within the environment
Problem: Lack of ionization and/or air movement
4. Air flow is restricted or reduced.
•
Is the unit properly placed away from objects that may obstruct air flow?
• Are the Filter Assembly, Back Cover, and Top and Rear Grill clean?
•
Is the ActivePure
Cell clean?
®
5. How can I tell if the ActivePure® Cell is functioning?
• The ActivePure
Cell will produce a glow that is visible through the Top and Rear Grill under low light conditions
®
6. Unit does not operate.
•
Is the unit plugged in?
• Are you sure the outlet is active?
• Are the Filter Assembly and Back Cover installed properly?
If your unit fails to operate properly after performing troubleshooting contact your sales representative or
ActivePure® Customer Service for further assistance at 800.572.1446 or email [email protected].
Cell
®
Surface & Air Guardian, and nothing happens. What's wrong?
®
Cell" Message.
®
11