Gakken Stirling engine Montaj ve Kullanım Talimatları - Sayfa 3

Oyuncak Gakken Stirling engine için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Gakken Stirling engine 12 sayfaları.

Sayfayı Yazdır

Before Assembling the Kit

Before Assembling the Kit
1.Understanding the right direction
1.Understanding the right direction
The direction is mentioned in the instructions. Check the right direction with the picture below.
The direction is mentioned in the instructions. Check the right direction with the picture below.
the hinder
the hinder
part
part
the right part
the right part
(the front)
(the front)
2.How to Use Supplied Tools
2.How to Use Supplied Tools
●wrench
●wrench
The wrench can be used not only for
The wrench can be used not only for
tightening a nut but also for tightening
tightening a nut but also for tightening
screws as shown in the right figure.
screws as shown in the right figure.
●small nut wrench
●small nut wrench
It is used to fasten the connecting
It is used to fasten the connecting
rod at figure-18 on p.13.
rod at figure-18 on p.13.
●screwdriver (cross-headed tip)
●screwdriver (cross-headed tip)
The screwdriver can be used not
The screwdriver can be used not
only for tightening a screw but also
only for tightening a screw but also
for tightening a nut as shown in the
for tightening a nut as shown in the
right figure.
right figure.
※ Please note that shapes and length of materials may appear slightly different from pictures and illustrations in this booklet.
※ Please note that shapes and length of materials may appear slightly different from pictures and illustrations in this booklet.
the left part
the left part
the fore
the fore
part
part
How to use the wrench
How to use the wrench
when tightening screws
when tightening screws
Put the thin part
Put the thin part
of the wrench at
of the wrench at
a slot of the screw
a slot of the screw
to fix.
to fix.
How to use the
How to use the
screwdriver
screwdriver
(cross-headed tip)
(cross-headed tip)
4
1
1

Assembling the Stand

Assembling the Stand
Parts to be used
Parts to be used
A1
A1
stand
stand
A2
A2
Two
Two
body holders
body holders
Figure ー
Figure ー
1
1
Attach the A5 safety
Attach the A5 safety
lever to the A1 stand
lever to the A1 stand
with 6mm screws.
with 6mm screws.
Then, attach the A6
Then, attach the A6
arm to the A5 safety
arm to the A5 safety
lever, put in the bush
lever, put in the bush
and fasten with the
and fasten with the
A7 arm part.
A7 arm part.
Turn.
Turn.
cross section of the safety
cross section of the safety
lever and the arm
lever and the arm
A6
A6
A5
A5
bush
bush
(7mm)
(7mm)
A7
A7
screw
screw
(6mm)
(6mm)
Full-scale
Full-scale
※Check the size with this.
※Check the size with this.
screw (6mm)
screw (6mm)
Turn.
Turn.
bush (7mm)
bush (7mm)
nut
nut
Warning ★ Fire is used for the experiment. Use great caution to avoid
Warning ★ Fire is used for the experiment. Use great caution to avoid
a burn and fire. Do not let a 15 or less-year-old child experiment alone.
a burn and fire. Do not let a 15 or less-year-old child experiment alone.
PARTS
PARTS
A
A
※ There may be more screws, washers, nuts
※ There may be more screws, washers, nuts
 and bushes than actually used for spare. 
 and bushes than actually used for spare. 
A8
A8
A9
A9
A3
A3
A5
A5
body holder
body holder
safety lever
safety lever
A6
A6
arm
arm
A4
A4
body holder
body holder
A7
A7
arm part
arm part
1
1
Attach the arm to the safety lever.
Attach the arm to the safety lever.
A7
A7
arm part
arm part
A6
A6
A7
A7
arm
arm
arm part
arm part
screw (6mm)
screw (6mm)
A5
A5
safety lever
safety lever
bush (7mm)
bush (7mm)
screw
screw
(6mm)
(6mm)
5
A10
A10
alcohol tray
alcohol tray
wick holder
wick holder
alcohol holder
alcohol holder
Fifteen 6mm
Fifteen 6mm
One 7mm
One 7mm
screws
screws
bush
bush
※Check the length
※Check the length
 of screws with this
 of screws with this
 diagram.
 diagram.
screw (6mm)
screw (6mm)
bush (7mm)
bush (7mm)
A6
A6
arm
arm
screw (6mm)
screw (6mm)
screw (6mm)
screw (6mm)
A5
A5
safety lever
safety lever
A1
A1
stand
stand