Gakken Stirling engine Montaj ve Kullanım Talimatları - Sayfa 9

Oyuncak Gakken Stirling engine için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Gakken Stirling engine 12 sayfaları.

Sayfayı Yazdır
6

Attaching the Safety Covers

PARTS
Parts to be used
F
※ There may be more screws, washers, nuts
 and bushes than actually used for spare. 
F1
Two
safety covers
F2
hinge part
F4
Four
thermal insulator hooks
F5
thermal insulator
25
25
Figure ー
Assemble the safety cover.
Assemble F1 safety
cover symmetrically.
F4
thermal insulator hook
(The F2 and the F3
are not the same.)
Strip off the E5 thermal
insulator from the center
into two sheets.
F1
safety cover
F3
hinge part
Full-scale
※Check the size with this.
screw (6mm)
Warning ★ Fire is used for the experiment. Use great caution to avoid
a burn and fire. Do not let a 15 or less-year-old child experiment alone.
F3
hinge part
Two 6mm
Two 40mm
screws
screws
F6
Two
32mm pipes
F7
sticker
※Check the length of screws
 with these diagrams.
F4
thermal insulator hook
F5
thermal insulators
F1
safety cover
screw
(6mm)
16
26
Figure ー
Insert the hooks of
the F2 and the F3
hinge parts into the
holes in the sliding
base to attach.
Two 9mm
across spacer
cross section of the
safety cover and the body
screw (40mm)
F2
F6
B1
pipe
(32mm)
spacer (9mm in diameter)
27
Figure ー
Set the assembled
body on the stand.
the joint of the body and the stand
screw (6mm)
F2
hinge part
Full-scale
※Check the size with this.
spacer (9mm in diameter)
F6
pipe (32mm)
screw (40mm)
26
Attach the safety covers
to the body.
F1
the hinder part
C3
spacer
(9mm in diameter)
27
Set it on the stand.
B1
body
the hinder
part
Push down the safety
lever to the left
when setting the body.
A1
17
screw (40mm)
screw (40mm)
F6
pipes (32mm)
spacer
(9mm in
diameter)
F1
safety covers
the fore part
B1
body
F1
safety cover
Fit on the fore part
first and then set
the hinder part.
the fore
stand
part