ADEMCO VISTA-20SE Programlama Formu - Sayfa 2

Kontrol Paneli ADEMCO VISTA-20SE için çevrimiçi göz atın veya pdf Programlama Formu indirin. ADEMCO VISTA-20SE 8 sayfaları. 2-partitioned security system
Ayrıca ADEMCO VISTA-20SE için: Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Programlama Formu (8 sayfalar)

Sayfayı Yazdır
ADEMCO VISTA-20SE Programlama Formu
Local programming requires the use of a 2-line Alpha keypad connected to
partition 1 keypad terminals on the control.
NOTE: For UL installations, the system may be configured as a single partition only.
Field
Function
SYSTEM SETUP (*20–*29)
* 20
INSTALLER CODE
* 21
QUICK ARM ENABLE
* 22
RF SYSTEM
* 23
FORCED BYPASS
* 24
RF HOUSE ID CODE
* 25
WIRED ZONE EXPANSION
* 26
CHIME BY ZONE
* 27
X–10 HOUSE CODE
* 28
PHONE MODULE ACCESS CODE
* 29
OUTPUT TO LONG RANGE RADIO
ZONE SOUNDS AND TIMING (*31–*39)
* 31
SINGLE ALARM SOUNDING/ZONE
* 32
FIRE SOUNDER TIMEOUT
* 33
ALARM BELL TIMEOUT
* 34
EXIT DELAY
* 35
ENTRY DELAY 1 (zone type 01)
† Entry of a number other than one specified will give unpredictable results.
Programmed Values
|
|
|
[4 1 1 2]
Enter 4 digits, 0–9
[0]
†
†
Part. 1
Part.2
0 = no; 1 = yes
[0]
0 = none; 1 = 5800 (5881/5882)
[0] [0]
†
†
Part. 1
Part. 2
0 = none; 1 = bypass open zones
"0". for UL installations.
|
[0][0]
00 = disable all wireless keypad usage; 01–31 = using 5827
keypad; Partition 2 RF House ID = Partition 1 House ID +1
† [0]
0 = none; 1 = 4219; 2 = 4229; 3 = 4204
† [0]
0 = no; 1 = yes (program zones to chime on zone list 3)
[0]
0 = A; 1 = B, 2 = C, 3 = D, 4 = E, 5 = F, 6 = G, 7 = H, 8 = I, 9 =
J, #10 = K, #11 = L, #12 = M, #13 = N, #14 = O, #15 = P
|
[00]
(Partition 1 only) 1st digit: enter 1–9; 2nd digit: enter # + 11 for " *
", or # + 12 for "#". Entering 0 for either digit disables code.
[0]
0 = disable; enable = Trouble code 1–9, B (# +11), C (# + 12), D
(# + 13), E (# + 14), or F (# + 15). The 2nd digit of Trouble Dialer
Report is automatically entered from field * 60. "0" for UL
installations.
† [0]
1 = yes; 0 = no; "0" for UL installations.
† [0]
0 = timeout; 1 = no timeout
† [1]
0 = none; 1=4 min; 2=8 min; 3=12 min; 4 = 16 min; "1" (4 min.)
minimum for UL.
|
|
[70] [70]
Part. 1 †
Part. 2 †
|
|
[30] [30]
Part. 1 † Part. 2 †
partition; 20 seconds max. for UL installations
– 2 –
[
] = Default Value
00-99 = exit delay time for each partition
00-99 = entry delay 1 time for each