Autometers Systems A-400 Series Programlama ve Kurulum Broşürü - Sayfa 2

Ölçüm Cihazları Autometers Systems A-400 Series için çevrimiçi göz atın veya pdf Programlama ve Kurulum Broşürü indirin. Autometers Systems A-400 Series 17 sayfaları. Mid approved sgs.uk appendix b and d, measures kwh, kvarh, kvar,pf,hz, max demand, rs 485 modbus autometers v6 protocol, two pulse outputs, bi- directional measurement for import and export, back light lcd for full viewing angles, available as 1 phase 2 w

Sayfayı Yazdır

Introduction

This document provides operating,

maintenance and installation

instructions.These units measure and

display the characteristics of single phase

two wires (1p2w),three phase three wires

(3p3w) and three phase four wires

(3p4w) networks.The measuring

parameters include voltage (V),

frequency (Hz),current (A),power

(kW/kVa/kVar),import, export and total

Energy (kWh/kVarh).The units can also

measure Maximum demand current and

power, this is measured over preset

periods of up to 60 minutes.

The A-400 range of meters are 100 amp

maximum direct connected meters and

can be supplied in two versions, with the

mains supply entering at the top of the

meter or the mains supply entering at

the bottom of the meter.

The meters can also be supplied with

diﬀerent communication outputs

Modbus RS 485, MBus or two individual

Pulse outputs one programmable.

Declaration of

Conformity

We, Autometers Systems Ltd, 4B Albany

Road, Manchester, M21 0AW, UK ensure

and declare that apparatus: Energy Meter:

A-400P, A-400M, A-400MB,A-400MT with

the measurement range 3x230/400V

0,25~5(45) A 50Hz are in conformity with

the type as described in the EU-type

examination certiﬁcate 0120/SGS0350 with

Serial number in format of XXXXXXXX, Batch

format: xxxxxx and satisfy the appropriate

requirements of the Directive 2014/32/EU

with the following standards: EN 50470-1:

2006, Electricity metering equipment (AC)

Part 1: General requirements, tests and test

conditions. Metering equipment (class

indexes A, B and C) and EN 50470-3: 2006,

Electricity metering equipment (AC) Part 3:

Particular requirements - Static meters for

active energy (class indexes A, B and C)