ActivePure Induct Guardian I Manuel - Sayfa 10

Kontrol Ünitesi ActivePure Induct Guardian I için çevrimiçi göz atın veya pdf Manuel indirin. ActivePure Induct Guardian I 16 sayfaları.

REPLACING THE BALLAST (CONTINUED)

6. To reconnect wiring, insert wire into wire pocket in ballast until bottomed. Gently pull wire to

ensure it is properly locked into place.

7. Replace cover and secure with the original

four (4) screws.

LED INDICATOR

8. Re-install unit if removed from duct. Reconnect

power cord, turn breaker or fuse power back on

and check for proper operation.

NOTE: LED indicator should be lit when

in operation.