Celestron 93711 Kullanıcı Kılavuzu - Sayfa 3

Dijital Kamera Celestron 93711 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Celestron 93711 12 sayfaları.
Ayrıca Celestron 93711 için: Kullanıcı Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Celestron 93711 Kullanıcı Kılavuzu

Quick Start

1. Place the CD into your computer's
CD-ROM drive.
2. Install both the NexImage iCap and
RegiStax software onto your computer.
3. Thread the 1.25" nose piece into the body
of the NexImage camera. See Fig 2.
4. Slide the 1.25" nose piece of the camera
into the eyepiece barrel of your telescope.
See Fig 3.
5. Plug the small end of the USB cable into
the port on the back of the camera.
6. Plug the other end of the USB cable
into a USB port on your computer.
Once connected, the Found New
Hardware message will appear. Follow
the Installation Wizard until the device
has been successfully installed.
Fig 2
Fig 3
3
ENGLISH
|