Hidrotermal HT-VC525-6W Kullanıcı Kılavuzu - Sayfa 4

Su Filtrasyon Sistemleri Hidrotermal HT-VC525-6W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Hidrotermal HT-VC525-6W 5 sayfaları.

Sayfayı Yazdır
2) Pump Replacement Parts
Item
1
2
3
4
5
6
7
8
9
10
Gland cover of Transparent cover
11
12
Release allairfrom filter and piping system.
In a flooded suction system (water source higher than pump), pump will prime itself when suction and
discharge valves are opened.
If pump is not in a flooded suction system, unscrew and remove trap cover; fill trap and pump with
water.
Clean and inspect Ring; re-install on trap cover.
Replace trap cover on trap; tum clockwise to tighten cover.
NOTICE: Tighten trap cover by hand only. Pump should prime now. Priming time will depend on
vertical length of suction lift and horizontal length of suction piping.
Product Description
Tie-in Nut
Tie-in
O-Ring
Drainge Plug
O-Ring
Pump casing
Filter
O-Ring
Transparent cover
Open Cover Wrench
O-Ring
Figure 3
Item
13
14
15
16
17
18
19
20
21
22
23
Product Description
O-Ring
Difusser
Activities Rings
Impeller
Mechanical seal
Pump cover
Pad
Hexagon bolt
O-Ring
Retaining block
Motor