Automotive Tazer JL Mini Kullanıcı Kılavuzu - Sayfa 5

Teşhis Ekipmanları Automotive Tazer JL Mini için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Automotive Tazer JL Mini 14 sayfaları. For jeep wrangler jl & gladiator jt 2018-2020

Sayfayı Yazdır

This section explains how to use the Tazer JL Mini to change the

Menu Navigation

• For all functions involving the dash

(EVIC) display, the EVIC screen first

needs to be in a state where it's

showing the AUDIO screen. Use the left

and up/down arrows to set the EVIC

display like this. One the display is in

this state, press and hold the steering

wheel LEFT ARROW, and tap the Cruise

"CANCEL" button to enter the settings

menu. Pressing LEFT ARROW and

CANCEL will advance through the menu

If you made any changes in the setup

"select" it.

This step is critical after changing

doesn't shut down, which

Some settings require two sleep/wake cycles.

the ignition off, leave the car, close the driver's door and walk away with the key. Wait

about 60 seconds AFTER the dash goes dark, then re-enter. Do this twice.

Exit the menu quickly and safely by

Vehicle Settings

vehicle settings for feature activation.

menu, be sure to scroll to

HOLDING

Cruise

"RES"

items. To change/select a setting,

press and hold LEFT ARROW and tap

the Cruise "ON/OFF" (center) button.

• Advance through the menu slowly.

• You can exit the menu quickly and

safely by holding the left arrow and

pressing the cruise RES button.

• If the text is overwritten by another

message, press the left arrow and the

display will revert back to the Audio

display.

settings, or you may find that the dash

can result in a dead battery.

The quickest way to do this is to turn

the

LEFT ARROW

button.

"full

reboot?" and

and

TAPPING

the