Celestron LABS NexStar 6SE Hızlı Kurulum Kılavuzu - Sayfa 2

Teleskop Celestron LABS NexStar 6SE için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Celestron LABS NexStar 6SE 4 sayfaları.

Quick Set-up Guide [cont]

Slide StarPointer finderscope onto

mounting platform as shown above.

Tighten screws located on side of

StarPointer to secure.

Insert silver barrel of 25mm eyepiece

into the diagonal as shown above.

Tighten silver screw (inset) to secure.

Before you begin viewing, please

remember to remove tube lens cap.

Before you can begin observing, you must setup your hand control,

align your finderscope and align your telescope. Step by step

instructions are included in the following Hand Control Setup action.

Insert silver barrel of diagonal into the

visual back as shown above. Tighten

silver screw to secure.

To power the telescope. Remove battery

cover on fork arm base as shown above.

(NOTE: A 12V AC adapter or Power Tank

may also be used for power.)

While observing, tube should be

positioned as shown above.

Tighten silver screw on the diagonal to

secure in place.

Place AA batteries (user supplied) inside the

battery compartment located at the base

of the fork arm and replace battery cover.

In order to get the best view through the

telescope, slowly turn the focus knob until

the objects are in sharp focus.

Focus

Knob