Hidrotermal Hidro-ST60B Kullanıcı Kılavuzu - Sayfa 9
Demir Hidrotermal Hidro-ST60B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Hidrotermal Hidro-ST60B 12 sayfaları.
Sayfayı Yazdır
4. Trouble Shooting Guide
There are user serviceable parts in the generator. All repairs should be performed by a
qualified service person. The Trouble Shooting Guide below is for general reference
only.
SYMPTOMS
No steam while
controller has been
turned ON.
Steam not stop after
turn off the controller
Water leak out from
the steam head
PROBABLE CAUSES
1. Steam generator hasn't been
connected with the water supply
2. The controller fails to function
3. The steam generator fails to function.
4. Rinse valve hasn't been shut off
1. The controller fails to function
2. The steam generator fails to function.
The steam generator fails to function.
ACTION TO BE TAKEN
1. At least wait 10 minutes after the
opened the controller.
2. Check if the circle protector is on
the "ON" position.
3. Check if the power is on and the
water supply valve is open.
4. Check if the rinse valve of
generator is closed. Close the circuit
protector and call our maintenance
service center of the above four steps
failed.
1. Switch off circuit protector.
2. Call our maintenance service
center.
1. Switch off circuit protector.
2. Shut off water supply valve.
3. Call our maintenance service
center.