Dynamic Precision DPA 6.4 Kullanıcı Kılavuzu - Sayfa 12
Amplifikatör Dynamic Precision DPA 6.4 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dynamic Precision DPA 6.4 13 sayfaları.
Sayfayı YazdırOUTPUT POWER, RMS, 20Hz-20kHz,
@ 1% THD (clipping level) :
Maximum output current:
DISTORTION, THD @ 400W
20Hz-20kHz in a 4 Ω load:
DISTORTION, THD @ 35V RMS, 1 kHz:
IM DISTORTION, CCIR 13 kHz and
14 kHz, 8 Ω load:
FREQUENCY RESPONSE:
SLEW RATE:
DAMPING FACTOR:
SIGNAL/NOISE RATIO, Ref. 250W/8Ω load:
INPUT IMPEDANCE:
GAIN:
SENSITIVITY:
CHANNEL SEPARATION:
COMMON MODE REJECTION RATIO:
DIMENSION (W x H x D in mm)
WEIGHT (kg)
THD:
Total harmonic distortion.
RMS:
The Root Mean Square of a voltage.
Dynamic Precision reserves the rights to change or alter the specifications and/or the technical
solutions without prior notice.
DPA 6.4
TECHNICAL SPECIFICATIONS
DPA 6.4
8 Ω load, 250W per channel
4 Ω load, 500W per channel
2 Ω load, 800W per channel
8 Ω load, 800W bridged mono
More than 60A per channel (120A peak)
Less than 0.002%
Less than 0.0002%
Less than 0.0003% (typical 0.0002%)
DC - 800kHz -3dB
DC - 150kHz -0dB
Greater than 250V/us
1000 @ DC - 20kHz/8Ω
10Hz-80 kHz
22Hz-22kHz
10Hz-CCIR-QPK
IEC-A weighted
100 kΩ (100pF in parallel)
31,7dB (38,4X)
1,04 V RMS for 200W/8Ω
More than 120dB@ DC -100kHz
Better than 100dB@ DC -100kHz
455 x 210 x 360
29
109dB
119dB
109dB
120dB
PAGE
11