Hidrotermal ARS-12.5 Kurulum ve Bakım Kılavuzu - Sayfa 5

Su Sebili Hidrotermal ARS-12.5 için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Hidrotermal ARS-12.5 12 sayfaları. Automatic residential softener

Sayfayı Yazdır

5. Language:

Chinese or English can he chosen. After power connected within 6 seconds, press and hold both

" and "

" for 5 seconds under the service status, the system will turn into language

selection interface.

6. Buttons lock function:

No operations to buttons within 1 minute, buttons are locked. Press and hold the "

for 5 seconds to unlock. This funciton can avoid incorrect operation.

7. Regeneration mode is meter delayed type:

Regenerate on the day although the available volume of treated water drops to zero(0).

Regeneration starts at the regeneration time. It can avoid the shortage of water for regeneration.

8. Working automatically:

Softening: Under a certain pressure and flow rate, the raw water flow through the product,at the same

time, the calcium ion and magnesium ion of raw water are replaced by the sodium ion of resin, reducing

the content of calcium ion and magnesium ion and realizing the purpose of softening water.

Backwash: After the resin is saturated and lose softening efficacy, the program start backwashing before

regeneration. On one hand, it can wipe off the broken resin and the impurity on surface layer of resin.On

the other hand, the reversed flow direction can loosen the tight resin and make it benefit for the touch

between resin particle and regeneration liquid.

Brine and slow rinse: A certain concentration brine flow through the resin.Meanwhile, the calcium ion

and magnesium on the resin surface layer are replaced by the sodium ion, making the invalid resin

regeneration and recovering its softening capacity.

Brine refill: The brine tank is refilled with water to dissolve the salt so as to provide the saturated brine

for next regeneration.

Fast rinse: Discharge the residual brine and compact the resin particle so as to reach the best

softening effect. By this step, the product automatically finished one service cycle.

5. Application

The product can be used for treating the tap water or other qualified raw water.

6. Techincal Parameters

Product Parameters:

Rated

Model

Flow

Rate(m3/h)

ARS-12.5 0.8~1.2m3/h

※ Water treatment capacity per cycle is various according to the difference water quality of different

region.

The standard testing conditions is: Water temperature: 25℃, Raw waterhardness: 150mg/L(CaCO3)

※ The outlet Water conforms with the regulations (2001) of Safety and Funtion Assessment for Drinking

Water Treatment Device-General Treatment Device.

※Transformer-Input: AC100-240V/50Hz-60Hz; Output: DC12V/1.5A

Water

Suggested

Capacity

Flow Rate

Per Cycle

(L/h)

(L)

300-500

500-800

1200

500-800

Rated

FRP Tank

Treated

Dimension

Water

(Ø×h)mm

Quantity

(M3)

180×331

320

180×432

205×381

" and"

" buttons

Cation

Brine

Resin

Tank

Drain

Volume(

Size(in)

4.5

0713

0717

0815

1/2