gala gar 51259B Manuel - Sayfa 5

Kaynak Aksesuarları gala gar 51259B için çevrimiçi göz atın veya pdf Manuel indirin. gala gar 51259B 9 sayfaları. Auto darkening filter welding helmet

Sayfayı Yazdır

The new features of GALAXY helmet, it uses unique optical technology, so as to make the filter have the best

vision color meeting physiological needs and high definition.

Warning: read and understand all instruction before using! Severe personal injury could occur if the user fails to

follow the aforementioned warnings, and/or fails to follow the operating instructions.

Before welding

Auto-darkening filter welding helmet comes ready for use. The only thing you need to do before your welding

is to adjust the position of the headband and select the correct shade number for your application.

Check the front cover lens to make sure that they are clean, and that no dirt is covering the four sensors on

the front of filter cartridge. Also check the front/inside cover lens and the front lens retaining frame to make

sure that they are secure.

Inspect all operating parts before use for signs of wear or damage. Any scratched cracked, or pitted parts

should be replaced immediately before using again to avoid severe personal injury.

Check for light tightness before each use.

Select the shade number you require at the turn of a shade knob. Finally, be sure that the shade number is

the correct setting for your application.

Adjust headband so that the helmet is seated as low as possible on the head and close to your face. Adjust

helmet's angle when in the lowered position by turning the adjustable limitation washer.

Choose the weld/grind switch position correctly before welding.

- Magnifying lens: The filter can be assembled with magnifying lens conveniently, please purchase magnifying

lens if need.

2..

Specifications

Viewing Field:

UV/IR Protection:

Function:

Light State:

Variable Shade:

Reaction Time:

Delay Time:

Sensitivity:

Sensors:

Power Supply:

Power On/Off:

Operating Temperature:

Storing Temperature:

Helmet Material:

DIN EN 175 B CE

Total Weight:

The product is in full conformity with related DIN EN 379, DIN EN 175 safety standards and ANSI/ISEA Z87.1-

2015 safety standards.

Before welding, please keep clean on filter, front cover lens and inside cover lens and four optical sensors. If front

cover lens and inside cover lens are blurry and cannot be clean, please replace them immediately.

100*65mm (3.94" × 2.56")

Up to Shade 16 at all time.

"WELDING"/ "GRINDING" can be selective

Shade 3 (& 3.5)

From "Shade 4 to shade 8" "shade 9 to shade 13" can be internal selective.

Please first choose the position of "MODE" switch on filter (three position for

choosing), so as to correspond with internal shade adjustment knob's area.

0.000033 sec (1/30,000s)

Short- Long (It can vary at 0.3s-0.9s)

inside can be continued adjustable

Four Infrared detector

Solar cells + lithium battery (replaced battery)

Fully Automatic.

- 5°C to + 55°C (23°F to 131°F).

- 20°C ~ + 70°C (-4°F to 158° F).

High-impact resistant Polyamide (Nylon)

480g

GALAXY