Automotive Data Solutions AKX Kurulum Kılavuzu - Sayfa 14

Uzaktan Çalıştırıcı Automotive Data Solutions AKX için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Automotive Data Solutions AKX 20 sayfaları. Remote car starters

Sayfayı Yazdır

It is mandatory to exit the Module Navigation

at the end of this procedure. Failure to exit the

Module Navigation will drain vehicle battery.

To exit the Module Navigation at any time:

Follow STEP 13.

Module must be programmed to the vehicle.

Use the Module Navigation Chart on the next

page.

Set ignition to OFF position.

OFF

ACC

ON START

ENGINE

START

STOP

TO ACCESS THE MENUS: Press and hold

programming button until LED 1 turns solid

GREEN.

IN THE MENUS: Press the programming

button as many times as the menu number

[X]

indicates. LED 1 will ﬂ ash GREEN an equal

amount of times continuously.

U.S. Patent No. 8,856,780

MODULE NAVIGATION PROCEDURE - 1 OF 1

TO ACCESS THE OPTIONS: Press and hold

programming button until LED 1 turns solid

RED.

IN THE OPTIONS: Press the programming

button as many times as the option number

[Y]

indicates. LED 1 will ﬂ ash RED an equal

amount of times continuously.

TO ACCESS THE SETTINGS: Press and hold

programming button until LED 1 turns solid

GREEN.

LED 1 will ﬂash GREEN as many times as

the current (or default) setting number,

[Z]

continuously.

IN THE SETTINGS: Press the programming

[Z]

button as many times as necessary to access

your setting. LED 1 will ﬂ ash GREEN an equal

amount of times continuously.

To return to the MENUS: exit the Module

Navigation and redo the Module Navigation

Procedure.

AKX-FO(RS)-FO1C-[AKX-FO1]-EN

To save and return to the OPTIONS: Press and

hold programming button until LED 1 turns

solid RED.

LED 1 will ﬂ ash RED as many times as the

current option number continuously.

[Y]

Configure every other setting and proceed to

step 13.

MANDATORY: EXIT MODULE NAVIGATION.

Press and hold programming button for 7

seconds. LED 1 will ﬂ ash RED rapidly. Release

programming button. LED 1 will turn OFF.

Module navigation completed.

Failure to exit the Module Navigation will drain

vehicle battery.

Page 14 oF 20

• 20150402

DOC.: #21627