Dynamic Projection MH08 Hızlı Kurulum Kılavuzu - Sayfa 6
Projektör Aksesuarları Dynamic Projection MH08 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Dynamic Projection MH08 10 sayfaları. Mirror head
Sayfayı Yazdır
Mirror Head Quick Installation Guide
For the full manual please visit
Using and operations (DMX512 / Art-Net™ / HTTP)
To use the Mirror Head as intended, a DMX512/Art-Net™ controller is needed with at least 14 channels.
In order to control the Mirror Head at least a 14 channel DMX Master is required.
DMX-512 controlled operation
1.
Make sure the unit is turned off.
2.
Connect the DMX XLR cable to the DMX-IN socket.
3.
Connect the power-cord so the unit turns on.
4.
Check the DMX settings in the control unit.
5.
Start sending DMX commands and check if the system reacts.
Art-Net™ controlled operation
1.
Make sure the unit is turned off.
2.
Connect the power-cord so the unit turns on.
3.
Check the DMX settings in the control unit.
4.
Check the IP address settings in the control unit.
5.
Connect the CAT cable to the control board.
6.
Start sending Art-Net™ DMX commands and check if the system reacts.
RS232 projector control
The Mirror Head control unit offers the possibility to send some basic remote control commands to the projector using the RS232 interface.
1.
Make sure the projector is turned on and accepts RS232 commands corresponding to the RS232 compatibility list in the appendix.
2.
The commands are sent to the projector whenever a specific DMX value is sent on the specific DMX channel – see DMX fixture chart.
Media Server with Art-Net™ control and
video playback
Mirror Head control unit
Art-Net™/HTTP
Power
Mirror Head
Model: MHE01
Power
optional
This setup shows the combination of the Mirror Head
and a Media Server (e.g. MDC-X) that is capable of
Art-Net™/HTTP control, video playback and optional geo-
metry effects. For more information about controlling the
Mirror Head see the „Using and operations" section.
https://www.dynamicprojection.com/mh-support/
DPCC / Media Server
RS232
Video
Projector
Copyright © 2014 - 2022 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Media Player and DMX Light Table
Mirror Head control unit
DMX
Art-Net™
Power
Mirror Head
Model: MHE01
Power
optional
This setup shows how the Mirror Head can easily be
integrated into DMX-Light Management (DMX512-XLR
or Art-Net™) and Media-playback. For more information
about controlling the Mirror Head see the „Using and
operations" section.
6
NOTE: It is maybe necessary to insert a
DMX / XLR termination plug (with 120
Ohm) in the last unit in the link in order to
ensure proper transmission on the DMX
data link – please ask your DMX operator.
NOTE: If you change the IP address of
the unit you may have to replug the CAT
cable in order to avoid ARP / IP caching of
some intermediate switching equipment.
DMX Light Desk
Media Player / Media Server
RS232
Video
Projector
QIG - Version 2.8