Aire Spring Haven 04612 Kullanım Kılavuzu - Sayfa 12

Fan Aire Spring Haven 04612 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aire Spring Haven 04612 16 sayfaları.

INSTALLING THE LIGHT BULBS & GLASS SHADE

WARNING: Shut off the power supply before removing or replacing lamp. In handling of halogen bulb, care should be

taken not to touch it with your bare hands. Oil residue will shorten the life of the halogen bulb. If you accidentally come

into contact, wipe thoroughly with a clean, lint-free, cotton cloth. Allow the bulb to cool for 10 minutes before changing

the bulb. Use light bulb in accordance with the fan's speciﬁcation. DO NOT EXCEED THE MAXIMUM WATTAGE RATING.

ATTENTION: The Energy Policy Act of 2005 requires this fan to be equipped with a 190 watt limiting device. If lamping

exceeds 190 watts, the ceiling fan's light kit will shut off automatically.

1. Install 2 x 50W halogen bulbs (included). (Fig. 18)

2. Remove the decorative cap from the light kit. Raise the glass shade up against the light kit, secure with the decorative

cap. Do not over tighten. (Fig. 18)

50 W HALOGEN

BULBS

DECORATIVE CAP

FIG. 18

LIGHT KIT

GLASS

SHADE