Agrisan MH 4 Kullanıcı El Kitabı ve Kullanım Kılavuzu - Sayfa 9

Mutfak Aletleri Agrisan MH 4 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı ve Kullanım Kılavuzu indirin. Agrisan MH 4 16 sayfaları. Hand mill

Interrupting the milling process

When beginning to mill hard grain types such as corn, rice or durum wheat

at ﬁne settings and with a full funnel the mill can become blocked.

Please re-adjust the setting from ﬁne to coarser until the mill begins to turn

then during the milling process adjust the setting in a clockwise direction

until the desired degree of ﬁneness is reached. When milling hard grain

varieties, if possible do not interrupt the milling process!

Should the funnel become blocked when milling wheat, spelt or

rye shortly turn the funnel in an anti-clockwise direction.

A tip:

the less ﬂour is between the millstones the easier the funnel

can be turned.

Adjusting the degree of ﬁneness

Coarse / ﬁne adjustment is possible by using the knurled nut and is locked by

applying the wing nut.

Coarse Setting:

Loosen the wing nut, adjust the knurled nut in the anti-clockwise direction

until you have the desired setting. Then tighten the wing nut.

Fine Setting:

Loosen the wing nut, adjust the knurled nut (counter in the clockwise

direction) until desired grade is reached. Then tighten the wing nut.

The MH4 grain mill can continually be adjusted and according to the adjust-

ment chosen produces very ﬁne ﬂour respectively grits.

Provided there is no grain between the mill stones and when the mill is not in

Operation, any desired adjustment of the ﬁneness setting can be carried out.

With a full funnel the mill can be adjusted to a coarser setting, however it can

only be set to a ﬁner setting during the milling process.