Agrisan MT 12 Kullanıcı El Kitabı - Sayfa 14

Mutfak Aletleri Agrisan MT 12 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Agrisan MT 12 17 sayfaları.

Please note:

The safety switch will automatically turn off the mill after a 25-minute non-stop

run. Please remember that this mill is manufactured to accommodate private

household use only!

Mill cannot be set to fine anymore:

hopper and upper mill housing is not tightly in place.

tIghten special locking screws on both sides of the hopper and upper mill

housing.

adjusting knob turns to coarse by itself

tighten adjusting knob on its axle by tightening the screw underneath the knob.

Hopper and upper mill housing is coming loose during

milling:

screws for holding hopper and upper mill housing in place are loose.

tighten screws until arrows point up right

Bolts for special locking screws are loose

Turn both bolts clockwise about a quarter of a turn until hopper and upper

housing assembly has a tight fit.

Before you decide to send your mill to us, please call first. 90% of the few

problems our customers experience can be solved on the phone. This saves

time and money. In case it should be necessary to ship the mill for service,

please pack it properly. It may be helpful to keep the original case.