Celia & Perah M6 Kullanıcı Kılavuzu - Sayfa 5

Stereo sistemi Celia & Perah M6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Celia & Perah M6 16 sayfaları. Wireless scalable hi-fi audio system

Sayfayı Yazdır

1. Bluetooth

Getting started

Installation

» Main Speakers

① Master and slave speaker positioning

Position the master speaker—the one with the control panel on the back—on the left side

of the listening position and the slave speaker on the right side. Depending on the position

of the TV screen and the surroundings, the speakers can be placed upright on the left and

right sides of the screen, or horizontally below the screen.

Master speaker

Slave speaker

② Adhesive rubber pads

Align the template to the four corners of the speaker's bottom and attach the rubber pads

one after the other.

Upright placementH

③ Master and slave speaker connection

Insert the RCA cable into the L/R into the connection ports on the back of the two speakers.

Master speaker

Slave speaker

orizontal placement

④ Connecting the power

Plug one end of the power cord into the DC IN power port on the back of the

active speaker and plug the other end into a power outlet.

» Subwoofer

① Installation spot

Place the Subwoofer nearby a power outlet with the rubber pads on the

ground.

Tip: Place the Subwoofer at a distance of 30 cm from the corner of the room for

optimal performances. Place the Subwoofer nearby the listening position for a

more direct and powerful bass performance.

② Connecting the power

Plug one end of the power cord into theDC INpower port on the back of the

Subwoofer and plug the other end into a power outlet.

Attention:The LED indicator will light up and blink slowly.

» Zone 2 Speakers (if any)

① Master and slave speaker positioning

The active speaker—the one with the connection ports and the buttons on the

back—should be installed to the left side of the listening position, while the

passive speaker should be installed to the right.

Getting started