Auton ARS 32.5-20 Kurulum Kılavuzu - Sayfa 4

Raflar ve Standlar Auton ARS 32.5-20 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Auton ARS 32.5-20 4 sayfaları. The authority in custom motorized lifts ceiling drop-down models

Sayfayı Yazdır
Step 4: Operation Instructions
Multi-Function Controller
The multi-function remote operates with RF (Radio Frequency)
and IR (Infrared) simultaneously and has 7 buttons.
1)
Up – Press and release for up motion
2)
Down – Press and release for down motion
3)
Left - Press and release for swivel left motion (on swivel models only)
4)
Right - Press and release for swivel right motion (on swivel models only)
5)
Stop - Press and release for stop motion
6)
Preset 1 - Press and release for Preset 1 position
7)
Preset 2 - Press and release for Preset 2 position
Additional Button Functions:
A)
When in motion, press the opposite direction.
The lift will pause for 1 second and then reverse direction.
B)
When in motion, press the same button direction.
The lift will stop.
C)
When the swivel is not in center position, press the
"Down" button to return to center and stay without retracting.
D)
When the swivel is not in center position, press the
"Up" button to return to center and retract to "home" position.
IR Control
Connect the IR eye to the EYE port
Optional Control Method
Connect optional control accessory
to AUX port
(See below to program position)
(See below to program position)
Dry Contact Operation:
Short desired operation with COM
3)
Left
6)
Preset 1
Programming Preset Positions:
The multi-function remote has two
programmable preset buttons. Use buttons
1-5 to move lift to desired position. Once
there, press and hold a preset button for
5 seconds to "learn" preset position. You
will hear a relay click from the receiver
You can also repeat the procedure above
to "relearn" a different preset position.
Easily override the preset position by
using the swivel buttons to move the
swivel to another desired position.
5)
Stop
4)
Right
2)
Up
Down
1)
7)
Preset 2