Activinsights GENEActiv Kullanım Kılavuzu - Sayfa 6

Fitness Ekipmanları Activinsights GENEActiv için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Activinsights GENEActiv 20 sayfaları.

Activinsights GENEActiv Kullanım Kılavuzu
Charging & Storing

a) Charging

Once you have received your GENEActiv device(s) allow them to fully charge in the cradle for 3
hours before configuring with the software.
This can be done via the USB port on your computer or using a USB wall plug. We recommend
using a wall plug when charging your devices so that it does not interfere with the GENEActiv
software. It is essential that the power supply provides 500mA on every port to ensure the devices
fully charge.
A red light on the device will indicate that the device is charging. After 3 hours, once a green light
flashes, this indicates that the device can be checked by the software to ensure the battery is full
and the device is ready for configuration. The LED lights are just visual indicators - it is essential to
check the battery level in the GENEActiv PC software for a reliable reading. When fully charged,
unplug and remove devices from the cradle if you are not configuring straight away.
IMPORTANT: DO NOT leave GENEActiv devices on charge for longer than 3 hours at a time.
Following a full 3 hours charge, the GENEActiv should have over 90% battery, prior to deployment.
6