Celiera KFR-51GW/Ga Kullanıcı Kılavuzu - Sayfa 6
Klima Celiera KFR-51GW/Ga için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Celiera KFR-51GW/Ga 14 sayfaları. Split wall-mounted air conditioner
Sayfayı Yazdır[Operation and indication sections of remote controller]
(OPERATION MODE indicator)-! ,
Indicates selected operation mode
( Fan speed indicator )
Indicates the selected air ra e.
C
TIME indicator
) —
During TIMER operation
nd cator TIMER
During normal operation ndicstor PRESENT TIME
(SET TEMPERATURE button)—
The two buttons set the room
temperature.
( SLEEP button
)
This button changes to SLEEP operation.
( Al ITO
C
TAPT huttnn ^
This button used for selecting t med starting
( AUTO STOP button
)—
This button used for seec ng timed
stopping.
C
CLK button
_)
\
^
^iVs HLI
f7T@f%|-
;,' ** .-* 'i\
CLOCK AM PM $|
ON/OFF
1
\
f
/
o7\
1
f
X
"1
-ooo-
Stf
fP
OUT FLAP
WO°
E
r~~N C -\^^~~~)
-^j ^_^c_^
m
°ST/\R
T
IN FLAPfW SPttO
-OOO
^
0r
°Srop
HOUR
HlH
V_
__,
(
RST button
")
Thisb
~~ — "~~~"^
•
\
1
Indicates the set temperature, (it doesn't
indicate temperature when operation mode
is AUTO select.)
Indicates selected flap mode.
1
( ON/OFF button
J
This button, when pressed, starts
operation and stops when repressed.
UU 1 rLAr DUtton
)
This button used for selection of the up/down
airflow direction.Whenever pressed, changes
the direction is the following order:
— (OPERATION MODE select button)
This button.whenever pressed.changes the mod
in the following order,
C. (AUTO) - o (COOL) --. (DRY)^ a (HEAT)/ 6 (FAN)
1
( FAN SPEED button 3
H
IN FLAP button
)
This button used for selection of the left/right
air flow direction, whenever pressed the in
flap will swing or fix.
— ( TIME SET button
)
The two button used for setting presenl
time and auto start or auto stop.
utton let computer rese
Above figure shows all indications for the purpose of explanation,
but practcally only the pertinent
When air-conditioner is cool-
only model, the HEAT change to FAN.
Unload the back Cover
(Transmission procedure)
When each button on the remote controller is pressed with the remote
controller pointing toward the air conditioner unit, signal is sent.
When the signal is received correctly, the receiving sound is emitted
from the unit.