Hifionics BRUTUS BRX160.2 Kurulum Talimatları Kılavuzu - Sayfa 6
Amplifikatör Hifionics BRUTUS BRX160.2 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Hifionics BRUTUS BRX160.2 13 sayfaları. Brutus brx series amplifers
Sayfayı YazdırBRX320.4 / BRX640.4 / BRX1200.4 4-CHANNEL AMPLIFIER APPLICATIONS
Front/Rear high pass, using a mono amplifier for mono sub bass
The combination of a mono and a 4 channel amplifier, utilizing their built in
crossovers, makes it a snap to put together a full system with front and rear
highs, with mono sub bass.
Interconnect cable checklist:
- Using good quality RCA cables, feed the front and rear outputs of a head unit to
the inputs of the 4 channel amplifier as shown.
- Also connect the LINE OUT of the 4 channel amplifier to the LINE INPUT of the
mono amplifier as shown.
Mono bass woofer wiring:
Connect the mono speaker positive terminal to the LEFT +, and its negative
terminal to RIGHT -.
Switch setting checklist:
4 channel highs amplifier:
- 1/2CH X-OVER: HI
- 3/4CH X-OVER: HI
BRUTUS
STEREO
INTERCONNECT
RCA CABLE
BRUTUS
Crossover frequency control checklist:
- 4 channel highs amplifier:
Channels 1 / 2 & 3 / 4:
- HI PASS: 100 Hz
- LOW PASS: N/A
Please note that these frequency points are suggestions only. Refer to the
loudspeaker manufacturer specifications and the section "Setting up systems
after installation for best performance"
Level control checklist:
- Refer to the section "Setting up systems after installation for best performance"
Minimum final loudspeaker impedances:
- 2 ohm per channel in stereo mode.
- 4 ohm mono bridged.