Cell2 SAS32R Kurulum ve Kullanım Kılavuzu - Sayfa 7

Konuşmacılar Cell2 SAS32R için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Cell2 SAS32R 8 sayfaları. Speaker siren system w/ control switch & mic set

Sayfayı Yazdır

CONTROLLER FUNCTION

Light Output

1. At any moment, short press once to activate or inactivate all

Light output #1 & #2 together.

2. While all light outputs are activated, long press to activate only

Light output #1.

3. While only front output is activated, long press again to activate

only Light output #2.

4. While only rear output is activated, long press again to activate

both Light output #1 & #2 together.

Siren Tone

1. Press once to turn the siren on in WAIL tone.

2. While siren is activated, press again once to cycle through all available tones.

3. While siren is activated, long press to disable siren tone.

Manual

1. If siren tone is not activated, press and hold for Manual WAIL tone. WAIL tone will ramp

up to peak and hold till button is released (or cut-off before it peaks).

2. If a siren tone is activated, press and hold for "Tone-Change". The Siren will return back

to the previous tone when button is released.

Standard Tone

WAIL

YELP

PHASER

HILO

Siren Tone

"ToneChange"

WAIL

YELP

PHASER

HILO

- 6 -

YELP

PHASER

HILO

PHASER