DBI SALA Flexiguard 8530564 Kullanım Kılavuzu - Sayfa 8

Raflar ve Standlar DBI SALA Flexiguard 8530564 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DBI SALA Flexiguard 8530564 18 sayfaları. Concrete mounted jib base
Ayrıca DBI SALA Flexiguard 8530564 için: Kurulum Talimatları Kılavuzu (8 sayfalar)

Sayfayı Yazdır

WARNING:

This product is part of a Personal Fall Arrest and Work Positioning system. The user must follow the manufacturer's instructions

for each component of the system. These instructions must be provided to the user of this equipment. The user must read and understand

these instructions before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this equipment.

Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.

IMPORTANT:

If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety. For general

questions, refer to national Standards including the ANSI Z359 (.0, .1, .2, .3, and .4) family of standards on fall protection, ANSI A10.32, and

applicable local, state, and federal (OSHA) requirements governing occupational safety for more information about fall protection systems.

IMPORTANT:

Prior to installation and use of this equipment, record the product identiﬁ cation information from the ID label in the

Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the Flexiguard

boom mounted Glide Rail Fall Arrest Systems that rotate 360° on various base options. Systems with a Counterweight Base can

be transported with a Forklift, Pallet Jack, Crane, etc. Systems with a stationary Flush Mount Base or Floor Mount Base can be

transported from base to base with a Crane, Hoist, or Forklift with a Lifting Strap/Chain.

Figure 2 illustrates components of the Adjustable Jib Boom Fall Arrest Systems. See Table 1 for component identiﬁ cation and

speciﬁ cations. The Jib Rail Assembly (A) extends from an Adjustable Upright (B) and supports a Glide Rail (C) with a Four-

Wheeled Trolley (D) that travels back and forth in the Rail Halves. The Trolley is equipped with a 5/8" Eye for connection of a

Self-Retracting Lifeline or Energy Absorbing Lanyard.

The Adjustable Upright is mounted on a Hitch Ball Post (E) that is embedded in a concrete ﬁ lled Counterweight Base (F),

embedded in concrete structure (G), or fastened to a concrete surface (H). The height of the Jib Boom is adjusted with a Hand

Crank (I) and Lifting Mechanism (J) that raise or lower the Adjustable Upright. The Adjustable Upright can be rotated 360° with

the foldable Rotation Handle (K) and locked at 11° increments with the Rotation Lock Pin Mechanism (L) or allowed to rotate

through a range deﬁ ned by two Rotation Limiters (R). The bottom of the Counterweight Base has Lifting Channels (N) and Lifting

Eyes (O) for transport with a Forklift, Pallet Jack, Crane, etc. and Slope Indicators (P) to ensure the system is level. Optional

Leveling Jacks (Q) can be installed on the Counterweight Bases.

Component Speciﬁ cations:

Figure 2

Reference

Component

Jib Rail Assembly

Adjustable Upright Assembly

Glide Rail

Four-Wheeled Trolley

Hitch Ball Post

Counterweight Base: 8530556

Flush Mount Base - 8530564

Floor Mount Base - 8530565

Hand Crank

Lifting Mechanism

Rotation Handle

Rotation Lock Pin Mechanism

Lifting Channels

Lifting Eyes

Slope Indicators

Jack Kit - 8530563

i-Safe™ RFID Tag

Rotation Limiters

System Speciﬁ cations:

Capacity:

1 Person per Glide Trolley with a combined weight (including clothing, tools, etc.) of no more than 420 lbs (191 kg)

Anchorage:

Structure supporting the Fall Arrest System must withstand a 8,800 lb (39 kN) vertical load.

DISTRIBUTED BY CAI SAFETY SYSTEMS | Phone: (888) 246 6999 | Web: caisafety.com | Email: [email protected]

Adjustable Jib Boom Fall Arrest Systems. The Adjustable Jib Booms are adjustable height

Table 1 – Speciﬁ cations

Materials

Aluminum

Tubes - Steel

Rollers - Nylatron

Lifting Connection Point - Steel

Aluminum Rail Halves

Wheels - Nylon

Bearings - Steel

5/8" Eye - Stainless Steel

Tube - Steel

Hitch Ball Pivot - Steel

Steel

Concrete with Steel Rebar

Steel

Base - Aluminum

Chain & Chain Cover - Steel

Gears - Steel

Rollers - Plastic

Tube - Steel

Hand Grip - Rubber

Plate - Steel

Pin - Zinc Plated Steel

Steel

Plastic Gauge on Aluminum

C-Channel

Jack - Steel

Mounting Tubes - Steel

Mounting Pin - Steel

Nylon, Glass

Steel with Magnets

Rating

Connection Point - LIFTING ONLY,

not for Fall Protection: 1,200 lbs

(544 kg) Vertical () Load

1,800 lbs (817 kg) Vertical ()

Load

5,000 lbs (2,268 kg) Vertical ()

Load

Filled with 4,000 psi Concrete:

8530566 = 5,000 lbs (2,268 kg)

5,000 lbs (2,268 kg) Vertical ()

Load (1,250 lbs per Eye)

7,000 lb (3,175 kg) Top Wind

Jacks

Radio Frequency - 13.56 MHz

Assembly/Install

Instruction

5903390

5903402

5903387

5903386