Galanz D90D25MSLDRIIV-HG Talimatlar Kılavuzu - Sayfa 17

Mikrodalga Fırın Galanz D90D25MSLDRIIV-HG için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Galanz D90D25MSLDRIIV-HG 18 sayfaları.

Sayfayı Yazdır
To cancel: In child lock mode, press and hold LOCK/TURNTABLE OFF button more than 3 seconds, the
indicator light will come off.
T
URNTABLE
During cooking, the turntable works by default. You can turn the turntable on or off by pressing
LOCK/TURNTABLE OFF button.
NOTE: Sometimes the turntable may become too hot to press. Be careful to touch the turntable.
F
AILURE DIAGNOSE
Failures
An error sign "Er10"display.
An error sign "Er11" display.
An error sign "Er12" display.
An error sign "Er13" display.
An error sign "Er30" display.
An error sign "Er40" display.
An error sign "Er41" display.
An error sign "Er42" display.
An error sign "Er43" display.
An error sign "Er44" display.
An error sign "Er45" display.
An error sign "Er46" display.
An error sign "Er47" display.
An error sign "Er48" display.
An error sign "Er49" display.
An error sign "Er60" display.
An error sign "Er61" display.
An error sign "Er81" display.
An error sign "Er82" display.
NOTE: For "Er10 ~ Er13", the display shows the code and continues to beep, after pressing
STOP/CANCEL button, the system comes back to normal standby mode.
High temperature alarm.
Low temperature alarm.
Open circuit alarm.
Short circuit alarm.
Inverter failure.
Inverter input under voltage.
Inverter input over voltage.
Over current protection.
Over temperature protection.
Magnetron fault.
Surge protection.
High voltage fault.
Switch tube fault.
Communication fault.
Auxiliary power supply.
Sensor fault, open circuit or short circuit.
Sensors selection is out of range.
Displayer communication transmission fault.
Displayer communication receiving fault.
16
Possible reasons