Dynamix Tiger 2Plus Kullanıcı Kılavuzu - Sayfa 16

Ağ Yönlendiricisi Dynamix Tiger 2Plus için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dynamix Tiger 2Plus 17 sayfaları. (4lan) adsl 2+ router

Sayfayı Yazdır

Note 1 The precondition is that LAN settings in the modem has not been modified.

Note 2 We usually start command line mode in Windows 2000 as follows: click on the "RUN" item of

Windows Start Menu, input characters "cmd" in the input box popped up with an "Enter". The

window subsequently popped up is the command line window.

Note 3 The returned values of ping command in the following format show the standard of "reachable"

If ping of the modem is reachable but ping of the outer fixed IP is unreachable, attention

should be concentrated upon device settings. Please enter the configuring interface following

the instructions in this manual.

Check first the number of connections. If more than one connection exists, for

troubleshooting , delete unused connections and remain the one connection you are

using.

Check the connection to see whether correct "type" is selected. It's normal to choose login

type of PPPoE. When you use PPPoE to login, the following information should be

provided: VPI and VCI, which can be queried from your ISP, user name and password.

Then make sure that "using NAT" and "default gateway" have been selected with a tick.

Check whether "connect on demand" has been selected with a tick. If it is selected, the

connection is activated only when traffic to outer networks arrives. If not selected, check

"keep connection", which should be set to 0 if you demand to keep connection

Make sure that the above parameters are saved after configuration. Internet is now available

since the configuration is properly done.

Tiger 2Plus (4LAN) ADSL 2+ Router

Figure 5.1

Page 16

User Manual

Total 17 Pages