Dynamix RC 908 EV 35 Kullanıcı Kılavuzu - Sayfa 4
Medya Dönüştürücü Dynamix RC 908 EV 35 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dynamix RC 908 EV 35 16 sayfaları. Ethernet to v.35 interface converter
Sayfayı Yazdır1.2 Product Specifications
V.35 interface:
Physical characteristics: Compliant with V.35 interface standard
Connector type:
Working mode:
Bit rate:
Ethernet interface
Connector type:
Bit rate:
Duplex mode:
Compliance:
Other capabilities:
1. The function of reporting V.35 signal loss alarm to Switches
2. Supports IEEE 802.1d Spanning Tree and IEEE 802.1q VLAN protocols
3. Supports over-sized Ethernet data frame up to 1595 bytes.
4. Supports IEEE 802.3x flow control in full duplex mode
5. Supports back pressure flow control in half duplex mode
6. Built-in 1k MAC address table with address filtering capability to improve the
efficiency of the V.35 link
7. Built-in SDRAM 64M memory to alleviate data congestion
Network management capabilities for RC908-EV35 (NM software is optional)
The network management capabilities include:
1. Set up the phase relationship between transmit/receive data and
transmit/receive clock at V.35 interface;
2. Set up of the buffer capacity;
3. Report operating status of Ethernet port to SNMP server;
4. Set up full/half duplex mode at Ethernet interface;
5. Set up fault-pass-through function;
6. Close the Ethernet interface and disable the modular through NMS
software;
7. Keep history record of all events.
HDB26 female connector (26 pin female port)
DTE
Dependent on DCE equipment, the maximum bit rate up
to 8Mbps
RJ-45 interface, CAT.5/enhanced CAT.5 wires, and the
maximum transmission distance up to 100m
10Mbps
Full/half duplex auto-negotiation
IEEE 802.3