ADENDORFF CM650 Kullanım Bilgileri Kılavuzu - Sayfa 6

Mikser ADENDORFF CM650 için çevrimiçi göz atın veya pdf Kullanım Bilgileri Kılavuzu indirin. ADENDORFF CM650 10 sayfaları. Concrete mixer

discharging the concrete mix and before refilling the Drum. (See Assy. Diagram.)

10. After discharging the cement mix, turn the Hand Wheel (part #51) clockwise4o return the Drum

(parts #4) to its original position. Then, make sure to fully engage the Brake Handle (part #60).

11. Repeat Steps

#5-9

if more cement mix is required.

12. When finished, make sure to. Thoroughly clean the inside of the Drum (part #4).

MAINTENANCE AND CLEANING

1. CAUTION: Never perform any services or maintenance on the Cement Mixer while it is running.

Before performing services or maintenance, turn off the engine and disconnect the spark plug wire to,

prevent accidental starting.

2. Before each use, inspect the general condition of the Cement Mixer. Check for loose screws,

misalignment, binding of moving parts, loose or broken parts, and any other condition that may affect

its safe operation. If abnormal noise or vibration occurs, turn off the Cement Mixer immediately and

have the problem corrected before further use. Do not use damaged equipment.

3. Retighten the V-belt (part #46) after the first 24 hours of use. The V-belt should be able to be

pressed in no more than 1/4" (See Assy. Diagram.)

4. Periodically, recheck all nuts, bolts and screws for tightness.

Thoroughly clean the Cement Mixer at the end of each day's operation. The Drum

Assembly (part #4) may be scoured for approximately two minutes, using a gravel

and water mixture. Then, discharge the gravel/water mixture and hose down the

Drum Assembly inside and out. (Sec Assy. Diagram.)

6. Dried cement mix should be scraped out of the Drum (part #4). Do not beat on the

Drum with a shovel or other tools to break up accumulations of died cement mix, as

damage to the Cement Mixer may result.

7. Do not pour or spray water over the Engine (part

#45).

(See Assy. Diagram.)

#45).

8. Daily check the oil level in the Engine (part

Refer to the Engine