ADENDORFF MAC AFRIC SMIXER-001 Orijinal Kullanım Talimatları - Sayfa 2
Mikser ADENDORFF MAC AFRIC SMIXER-001 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. ADENDORFF MAC AFRIC SMIXER-001 6 sayfaları. Stirring electric 800w paddle/mixer slade not included
GENERAL POWER TOOL SAFETY WARNINGS
(For All Power Tools)
WARNING! Read and understand all instructions.
instructions listed below may result in electric shock, fire and/or serious
personal injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Work Area Safety
1.
Cluttered or dark areas invite accidents.
Keep work area clean and well lit.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a power tool.
cause you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never modify the plug in anyway. Do not use
any adapter plugs with earthed (grounded) power tools.
matching outlets will reduce risk of electric shock.
5. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
There is an increased risk o electric shock if your body is
ranges and refrigerators.
earthed or grounded.
6. Do not expose power tools to rain or wet conditions.
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
entangled cords increase the risk of electric shock.
8. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
a cord suitable for outdoor use reduces the risk of electric shock.
9. If operating a power in a damp location is unavoidable, use a residual current device (RCD)
Failure to follow all
Distractions can
Unmodified plugs and
Water entering a power tool will
Damaged or
Use of
Use of an RCD reduces the risk of electric shock.
protected supply.
NOTE: The term "residual current device (RCD)" may be replaced by the term "ground fault
circuit interrupter (GFCI)" or "earth leakage circuit breaker (ELCB)".
Personal Safety
10. Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol, or
medication.
A moment of inattention while operating power tools may result in serious
personal injury.
11.
Use personal protective equipment. Always wear eye protection.
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
12. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and /or battery pack, picking up or carrying the tool.
with your finger on the switch or energising power tools that have the switch on invites
accidents.
13. Remove any adjusting key or wrench before turning the tool on.
attached to a rotating part of the power tool may result in personal injury.
14. Do not overreach. Keep proper footing and balance at all times.
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves
Loose clothes, jewellery or long hair can be caught in moving
away from moving parts.
parts.
16. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
hazards.
Power Tool Use and Care
17. Do not force the power tool. Use the correct power tool for your application.
correct power tool will do the job better and safer at the rate for which it was
designed.
18.
Do not use tool if switch does not turn it on or off.
Protective equipment such
Carrying power tools
A wrench or a key left
This enables better control
Use of dust collection can reduce dust-related
The
Any power tool that cannot be