dBTechnologies VIO L1610 Hızlı Başlangıç Kullanım Kılavuzu - Sayfa 7
Hoparlör Sistemi dBTechnologies VIO L1610 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kullanım Kılavuzu indirin. dBTechnologies VIO L1610 7 sayfaları. Symmetrical active 3-way line array with coaxial driver
Sayfayı Yazdır
Technical Data
Speaker
Type:
3-way professional active line-array
element
Acoustical data
Max SPL (@1m): 141 dB
Frequency response [-10 dB]:
Frequency response [-6 dB]:
HF/MF:
coaxial, neodymium, 1.4" exit
HF/MF voice coil:
2.5" / 4"
LF:
2x 10" (voice coil: 2.5"), neodymium
Xover
frequencies:
500 Hz – 3300 Hz
Horizontal dispersion ([-6dB] 500 – 18100
Vertical
dispersion:
varies on number of modules and
configurations
Amplifier
Amp
Technology:
Digipro® G4 - Autorange
Amp
Class:
Class-D
RMS
Power:
1600 W
Peak Power:
3200 W
Cooling:
Passive (convection) + fan
Operating range:
220-240V~ (50-60Hz)/100-120V~ (50-60 Hz)
Download the complete user manual on:
www.dbtechnologies.com/EN/Downloads.aspx
EMI CLASSIFICATION
According to the standards EN 55032 and 55035 this is a Class A equipment, designed and suitable to operate for professional use. Warning: This equipment is
compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
FCC CLASS A STATEMENT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties. For safety reasons
do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check all the components for damages,
deformations, missing or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots exposed to bad weather
conditions.
Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories
or additional devices.
Features, specification and appearance of products are subject to change without notice.
dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products
previously manufactured
.
VIO L1610
www.dbtechnologies.com
56 Hz – 20 kHz
60 Hz – 17 kHz
Hz):
100°
Processor
Controller:
DSP, 32/96 bit
AD/DA
conversion:
24 bit /96 kHz
Limiter:
Dual Active Peak, RMS, Thermal
Controls:
HPF filter, DSP presets, system test
Advanced DSP
function:
Rotary
presets: 2
Rotary BCD 8 positions for line-array
configuration (Speaker Coupling, High Frequency
Compensation)
Input / Output
Mains
connections:
PowerCON
Signal
Input:
(Balanced) 1x XLR IN
Signal
Out:
(Balanced) 1 x XLR link OUT
RDNET connectors:
Data In
USB
connector:
USB B-type (for SERVICE DATA)
Mechanics
Housing:
Wooden box – Black polyurea finished
Grille:
CNC machined full metal grille
Rigging
points:
3 (Easy Rigging)
Handles:
2 for each side
Width:
720 mm (28.35 in)
Height:
320 mm (12.60 in)
Depth:
520 mm (20.47 in)
Weight:
31,3 kg (69 lbs)
info@dbtechnologies‐aeb.com
Linear Phase FIR filters
®
TRUE1 In / Link
/
Data Out
420120324Q REV.1.0