Hifonics COLOSSUS CX15D2 Kurulum Kılavuzu - Sayfa 6

Subwoofer Hifonics COLOSSUS CX15D2 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Hifonics COLOSSUS CX15D2 8 sayfaları.

RECOMMENDED ENCLOSURES

CX12D2 Vented Enclosure (Bassreflex) for absolute SPL:

Vb: 75 Litres

fb: 48 Hz

Reflexport tube: 2 x, diameter 100 mm, length 160 mm

CX12D2 Vented Enclosure (Bassreflex) for more sound quality:

Vb: 50 Litres

fb: 37 Hz

Reflexport tube: 1 x, diameter 100 mm, length 260 mm

CX15D2 Vented Enclosure (Bassreflex) for absolute SPL:

Vb: 125 Litres fb: 47 Hz

Reflexport tube: 4 x, diameter 100 mm, length 180 mm

CX15D2 Vented Enclosure (Bassreflex) for more sound quality:

Vb: 90 Litres

fb: 37 Hz

Reflexport tube: 2 x, diameter 100 mm, length 260 mm

The exterior baffles of the enclosure must be encased with sound proofing on the

inner side. Please ensure, that no sound proofing is located between the subwoofer

and the reflexport opening.

The CX Subwoofes offer several conncetion options, like displayed on the following

page. Please make yourself familiar with the owner's manual of the amplifier, before

you start with the connection. Attend therfor also the minimum impedance and

output power of the amplifier.

Please note, if you chose the parallel conncetion, the subwoofer impedance will be

halved to 1 ohm. Check therefor the minimum impedance of your amplifier and if

he is 1 ohm operation stable. If you chose the serial connection, the impedances

of the voice-coils will be added, so that no problems with the load capabilty of the

amplifier are expected.

Please use only high valued speaker cables with a minimum profile section of 4,0

for the wiring of the subwoofer.

NOTE: Please ensure by any means the correct polarity of all connections.

Faulty installed and connected devices may damage the amplifier and subwoofer

seriously. Please ensure by any means not to go below the minimum

impedance.

ENGLISH

f3: 39 Hz

f3: 32 Hz

f3: 38 Hz

f3: 32 Hz

COLOSSUS SERIES