dbx iEQ-31 Kullanıcı Kılavuzu - Sayfa 8
Kayıt Ekipmanları dbx iEQ-31 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dbx iEQ-31 16 sayfaları. Graphic eq
Ayrıca dbx iEQ-31 için: Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Hızlı Genel Bakış (4 sayfalar)
Sayfayı Yazdır
Operation
Installation Recommendations
User Power-Up Modes
iEQ User Manual
1
Installation / User Power-Up Modes
FOR RACK MOUNT USE ONLY - Install the iEQ in your rack with the provided rack screws.
When installed in a rack, the unit should be positioned with enough room (at least one 1U
above the and 1U below the unit) to allow proper ventilation. The iEQ should not be mount-
ed above or below anything that generates excessive heat. Ambient temperatures should not
exceed 113
0
F (45
0
C) when equipment is in use. Although the unit is shielded against radio fre-
quency and electromagnetic interference, extremely high fields of RF and EMI should be avoid-
ed where possible.
Unlike conventional graphic equalizers of the past, the iEQ Series EQs offer you the ability to
lockout access to frequency slider manipulation and reset AFS filter settings. The procedure for
these functions are as follows:
1. Entry
While applying power, press and hold the <AFS> button on CHANNEL 1 until the following
LED display sequence pattern on Ch1 Meters briefly appears:
Power Up Prompt
2. Menus
To select any one of the three available option (which are: 1. System Lockout 2. Live Filter Lift
Time Menu, and 3. AFS Normal vs. 6-Fixed/6-Live Menu), press the <AFS> button on CHAN-
NEL 1 to select through 1 of 3 menus. The meter LEDs appear as follow:
Power Up Menu
3. Selections
System Lockout - Press the <AFS> button on CHANNEL 2 to select through selections with-
in menus. The selections for System Lockout are : System Unlocked and System Locked and
will be represented by a lit LED once selected. The following illustration show the selections
and the corresponding LEDs indicators:
System Lockout Menu
Channel 1
CHANNEL
CHANNEL 2
iEQ
®