Autonics BL13-TDT Kullanım Kılavuzu - Sayfa 3

Ölçüm Cihazları Autonics BL13-TDT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Autonics BL13-TDT 4 sayfaları. Liquid level sensor for mounting pipe (through-beam)

Sayfayı Yazdır

BL Series

Dimensions

Ø13

Opticlal

axis

◎ Protection bracket (BK-BL13-P(sold separately))

Ø34

Ø15

27.4

※ F or using the protection bracket, only Ø12.7mm (1/2 inch) pipes are available.

Installation

If installing this unit at opaque pipes, it is impossible to detect accurately. Install this unit at the rated pipes.

Using binding band: Ø6 to 13mm, Using protection bracket: Ø12.7mm (1/2 inch)

● If installing this unit at an opaque pipe, it is impossible to

detect accurately. Install this unit at the rated pipe.

● Fix a pipe and this sensor tightly with binding bands and

anti-slip tubes as the below figure and cut the spare part

of binding bands with scissors or a knife.

● When connecting binding bands, be careful not to

transform a pipe.

Anti-slip

tube

Pipe

※ Principle of operation

It detects whether there is liquid or not in a pipe by

refractive index of light.

Receiver

Emitter

Liquid

A-142

Operation indicator

Ø2.5, 1m

Ø12.7

Ø15.7

Ø16.7

Binding band

(max. 2.5mm width)

Emitter

Operation mode indicator(green)

(red)

28.4

26.4

◎ Protection bracket (sold separately)

Choose a location on the pipe and attach the sensor and

the protection bracket.

Sensor

Receiver

Liquid

Operation mode

switching button

Pipe: Ø12.7mm (1/2 inch)

(unit: mm)

Protection

bracekt