909 20VHTG Kullanım Kılavuzu - Sayfa 6
Düzeltici 909 20VHTG için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 909 20VHTG 16 sayfaları.
Sayfayı Yazdır•
Wear work gloves, eye protection, solid shoes and
trousers when using this hedge trimmer.
•
Always grasp both handles when operating the unit.
Disconnect the trimmer from the mains supply when
•
you have finished work, before cleaning or if you have
been interrupted.
•
This trimmer has been designed to cut soft, new growth
and should not be used on branches, hard wood or other
forms of cutting.
•
Do not attempt to free a jammed blade before first
switching off the machine and removing the battery pack.
•
If you are interrupted when operating the trimmer,
complete the process and switch off before looking up.
•
Never allow untrained users or children to use
the trimmer.
Wear goggles
Wear ear defenders
Wear a breathing mask
Additional safety rules for the charger
•
Your 909 tool with Lithium-Ion batteries may only be
charged with the specific designed 909 Lithium-Ion
battery charger purchased with the tool.
DANGEROUS TO USE ANY OTHER BATTERY
CHARGER TO CHARGE YOUR TOOL.
to charge the battery pack with any other charger than
the one supplied.
•
If there is a problem with the battery or the tool, take
it to your nearest Authorised Service centre or phone
and speak with an experienced 909 Customer Service
Representative for assistance in rectifying your problem.
Before using the charger, read all the instructions, labels
•
and cautionary markings on the charger and battery pack
as well as the instructions on using the battery pack.
20VHTG IM ed6.indd 6
•
Do not use the charger if it has been subjected to a
heavy knock, dropped or otherwise damaged in any way.
Take the charger to an authorised service centre for a
check or repair.
•
Do not disassemble the charger. Phone to speak with
an experienced 909 Customer Service Representative
or contact an Authorised Service centre for assistance.
Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly
can cause electric shock when you use the tool or
charger again. Take the charger to an authorised service
centre when service or repair is required. Incorrect
re-assembly may result in the risk of fire, electric shock or
electrocution. To reduce the risk of electric shock, do not
disassemble any part of the product.
DANGER.
•
any other way, do not insert it in the charger.
•
Do not plug anything other than your 909 battery pack
into the charger, as other objects may touch dangerous
voltage points or short out parts, which could result in fire
or electric shock.
•
Do not place the tool or charger on an uneven surface,
as a fall may cause serious damage.
IT IS
•
Never place the tool or charger near or over a heat
source such as a radiator or heater.
Do not attempt
•
Do not operate the charger in a cabinet or other
enclosure unless proper ventilation is provided.
•
Use the battery charger indoors only.
WARNING.
with the charger. There is a danger of electric shock. Do not
position the tool or battery charger near water; for example,
near a sink, wash bowl or toilet. Do not spill liquid of any
kind on the tool or charger. Doing so may short out parts,
causing damage to the product and creating the risk of fire
or electric shock.
6
If the battery pack is cracked or damaged in
Do not allow any liquid to come into contact
28/8/13 8:09:50 AM