Galaxy Audio Any Spot DHT-QUAD Kullanıcı Kılavuzu - Sayfa 9
Mikrofon sistemi Galaxy Audio Any Spot DHT-QUAD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Galaxy Audio Any Spot DHT-QUAD 12 sayfaları.
Ayrıca Galaxy Audio Any Spot DHT-QUAD için: Kullanıcı Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Tips for Improving System Performance
Maintain a line of sight between transmitters and antennas.
Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computers, etc).
Keep the receiver away from the wall and at least 1m from the ground.
Cellular telephones and two-way radios can interfere with the operation of wireless systems.
Do not use these devices in close proximity to the wireless systems.
Troubleshooting
Issue
No sound or faint
sound.
Distortion or
unwanted noise.
Distortion level
increases gradually.
Sound level different
from cabled guitar or
microphone, or when
using different guitars.
Indicator Status
Transmitter LCD off.
Receiver LCD off.
Receiver indicates RF.
Receiver indicates No RF,
Transmitter LCD is on.
The battery power indicator
light on LCD flashes.
Receiver Indicates RF.
Transmitter power indicator
light flashing on the LCD.
Solution
Turn on transmitter.
Make sure the batteries are installed
correctly.
Make sure AC adapter is securely
plugged into electrical outlet and into
DC input connector on rear panel of
receiver.
Increase receiver volume.
Make sure Gain adjustment switch on
the transmitter is set correctly (applies
only to MBP76 Bodypack.)
Make sure Transmitter and Receiver
are set to the same frequency.
Make sure Transmitter is in range of
Receiver.
Make sure no large metal objects are
near Transmitter or Receiver.
Change the batteries in transmitter.
Remove nearby sources of RF inter-
ference (CD players, computers,
in-ear monitor systems, etc.)
Replace Transmitter batteries.
Adjust Transmitter Gain and Receiver
Volume as necessary.