dbx 566 Kullanıcı El Kitabı - Sayfa 7

Müzik Ekipmanları dbx 566 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. dbx 566 16 sayfaları. Vacuum tube compressor
Ayrıca dbx 566 için: Broşür ve Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

Compressor Controls

Figure 2: Front Panel Controls

+ 0 - THRESHOLD leds:

The Ò+Ó led illuminates when the signal is above the OverEasy

portion of the compression curve

and that the full compression ratio is in effect . If OverEasy

is disabled, this led indicates that the

signal is above the level set by the Compressor Threshold control and that compression is occuring.

portion of the compression curve. In this

The Ò0Ó led illuminates when the signal is in the OverEasy

region the ratio varies as a function of signal level between 1:1 and the ratio set by the Ratio control.

This led will not light when the OverEasy

function is off.

The Ò-Ó led illuminates when the signal is below the level set by the Compressor Threshold control.

This indicates that the Compressor is not compressing and is operating in its linear region.

THRESHOLD control:

This control sets the level above which compression occurs, and has a 60 dB range.

OverEasy

switch:

OverEasy

is a feature that provides a softer compression sound than hard knee does. OverEasy

smooths the transition from un-compressed to compressed. This smooth transition greatly reduces

compression artifacts and allows faster attack times and higher compression ratios while still main-

taining the natural characteristics of the signal. The switch lights to indicate OverEasy

processing is

enabled. When conventional hard knee processing is desired, disable the OverEasy

function. See

Figure 3 for a comparison of OverEasy

and hard knee compression curves.