DYNAPAR SLIM Tach SL85 Kullanım Kılavuzu - Sayfa 6

Medya Dönüştürücü DYNAPAR SLIM Tach SL85 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DYNAPAR SLIM Tach SL85 14 sayfaları. Magnetoresistive encoder, designed for use in 0.625" to 3.000" 16mm to 76mm, shaft diameters

Sayfayı Yazdır

2.0 Inspection and Unpacking

Inspect shipping container for external damage. All claims for damage (apparent or concealed) or partial loss of shipment

must be made in writing to Dynapar within (5) days from receipt of goods. If damage or loss is apparent, please notify the

shipping agent immediately.

Open shipping container and locate the packing list. The packing list is included to verify that all components, accessories,

and manual were received. Please use the packing list to check off each item as the unit is unpacked. Inspect for damage. We

recommend that the shipping container be retained for future shipping, storage, or return to factory purposes.

If any equipment was damaged in transit, be sure to file proper claims promptly with the carrier and insurance company.

Please advise us of such filing. In case of parts shortages, advise us immediately. Dynapar cannot be responsible for any

missing parts unless notified within 60 days of shipment.

Motor Facing and Shaft for Thru-Shaft SL85

To prepare the motor facing and shaft for installation, perform the following steps. See Figure 2.

1. Clean outer rim and mounting surface of motor facing and shaft of paint, grease, dirt, and other debris where

SLIMTACH

SL85 unit contacts motor or accessory. Also ensure that mating surfaces have not been damaged and that

unit will fit squarely on motor.

Apply a thin layer of corrosion preventative or oil to motor facing and shaft to aid assembly and provide some corrosion

protection.

Ensure there is no paint, burrs, protrusions, or deformations on the motor facing or

shaft. If the enclosure does not fit squarely on the motor facing, the alignment between

the encoder frame and the magnetic pulse wheel may be degraded.

Figure 2: Typical 8.5-Inch Diameter Type C Face Motor Thru-Shaft Application

NorthStar SLIM Tach

CHAPTER 2

INSTALLATION

CAUTION!

DYNAPAR

SL85 Instruction Manual

+1.800.873.8731