Galaxy Audio Any-Spot AS-1800 Kullanıcı Kılavuzu - Sayfa 9

Kayıt Ekipmanları Galaxy Audio Any-Spot AS-1800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Galaxy Audio Any-Spot AS-1800 12 sayfaları. Galaxy audio any-spot professional wireless in-ear monitor system

Sayfayı Yazdır

AS-1800 Receiver Setup

1.) Turn on the receiver, the LCD displays the preset data.

2.) Change the frequency by pressing the

"SET" to confirm the selected frequency.

3.) To enter the menu mode: Press and hold the SET button for 3 seconds to enter the edit mode,

press the

button to select and set SQ, LOC or P OFF.

</>

A.) SQ (squelch): Select "SQ", then press SET Button to enter edit mode, the squelch level

flashes to indicate editing, press the

squelch level is adjustable in ten 5dB steps, providing a 50dB range. Press the SET button to

confirm the desired choice.

(SQUELCH of receiver has been preset at the factory. If interference is a problem, first consider

trying a different frequency. If it is not necessary, please do not adjust the SQUELCH randomly.

This could cause unwanted interference. )

B.) LOC (lock): Select "LOC", then press the SET Button to enter edit mode, press < or > arrow

button to select "ON" or "OFF", When "ON" is selected, the AS-1800R enters lock mode, the

user can not use any button for any control; When selecting "OFF", changes to the AS-

1800R can be made. Press the SET Button on the receiver to confirm the desired choice.

C.) P OFF (power off): Select "P OFF", then press SET Button to enter edit mode, press < or >

arrow button to select "OPEN" or "CLOSE", When "OPEN" is selected, the unit will turn off

automatically after 30 minutes if it is outside the communications service area (no signal

available ); When "CLOSE" is selected, the unit has to be turned off manual. Press the SET

Button on the receiver to confirm the desired choice.

button to change the frequency, then

</>

button to scroll through the available choice. The

</>

System Setup