Galaxy Audio HDR2 Kullanım Kılavuzu - Sayfa 5
Kayıt Ekipmanları Galaxy Audio HDR2 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Galaxy Audio HDR2 14 sayfaları. Galaxy audio handheld digital recorder instruction manual
Sayfayı Yazdır3. Recording indicator LED: the LED will light up during recording.
4. Built-in speaker: a monitor speaker is installed, it is not active when earphones are
plugged in.
5. Battery cover: open the cover and install two AA batteries to operate.
6. Battery select switch: when using primary batteries (or Alkaline batteries), switch to
"1.5V"; or switch to "1.2V" when using Ni-MH rechargeable batteries.
7. Volume controller of Audio-in "L" channel
8. Volume controller of Audio-in "R" channel
9. Audio-in "L" channel: it allows audio input of M(ext. microphone), G(guitar) or L(Line-
in). It provides 1.5V power supply.
10. Audio-in "R" channel: it allows audio inputs of M(ext. microphone), G(guitar) or
L(Line-in). It provides 1.5V power supply.
11. Audio-in selector: to select three kinds of audio input types, M(ext. microphone) /
G(guitar) / L(line-in)
12. Built-in microphone sensitivity selector: H(high) / L(low) / OFF: to select the
sensitivity level of built-in microphones, H(high) or L(low). Or switch off the built-in
microphones (OFF).
13. Key hold switch ON / OFF: switch "ON" to hold (stop running) the key control, or
switch "OFF" to release key control.
14. Earphone jack (stereo): when an earphone is connected to this jack, the built-in
speaker will be switched off.
15. Line out port: connect to an amplifier.
16. SD card socket: for SD memory cards.
17. SD port / DC Power in: Use a USB cable to connecting with a computer. You may use
a USB type DC adaptor (DC 5V) to power the unit from this port (DC power adaptor is
not included; model HDR2USBDC).
Record button: press this button to start recording (there may be a few second pause
before the indicator lights up).
Stop button: press this button to stop or cancel operations (recording, playback,
delete...)
A-B loop button: press this button during playback to define a loop start point (A point),
then press the button again to indicate the loop end point (B point). The track will then
play from A to B repeatedly until you press the button again to stop.
MENU button: press this button to enter MENU, press the button again to leave MENU.
Power/Play button: press and hold 2 seconds to switch ON or OFF the HDR2; Press
the button to PLAYBACK; press it during playback will pause playback, push it again
to continue playback.
Track down/Rewind button: Press this button once to select previous track, hold
down the button to change the track number quickly; Hold down the key during
playing to rewind playback, release the button to go back to normal playback.
3