DBZ DMi 2/4000A Kullanıcı Kılavuzu - Sayfa 7

Amplifikatör DBZ DMi 2/4000A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DBZ DMi 2/4000A 20 sayfaları. Professional power amplifier

1.Mounting Hole

Used for fixing amplifiers on cabinets, easy to transport.

2.Handle

Used for handling product.

3.Air slot

The fan draws air from the front and exits it from the back. Do not block the intake and

exhaust ports.

Remarks: When the power is initially turned on, the fan will have an accelerated start-up sequence,

and the fan speed will automatically adjust to the normal low speed state.

4. CH1 Volume Knob

Input signal attenuator, in stereo and parallel mode, they control the volume of the corresponding

channel; when bridged, CH1 will control the volume of the two channels CH1 and CH2.

5.CH2 Volume Knob

Input signal attenuator, in stereo and parallel mode, they control the volume of the corresponding

channel; when bridged, CH2 volume knob is idle and not controlled.

6.Function LED lights

6.1 CLIP Level LED light

A red indicator will light when the amplitude of the output signal of the corresponding channel

(above the nominal power) has shaved off and is more than 1% distorted.

6.2 Signal Level LED light

SIG Signal and -5, -10 level LED indicators.

6.4 ON—Power LED light

Indicates that the amplifier is turned on and is in the working state.

7.LCD Screen Introduction

7.1 Voltage Display, from 150V to 270V.

7.2 Temperature Display, from 0℃ to 100℃.

8.Power Switch

Press the switch up to "ON "and down to "OFF". When the switch is turned on, the amplifier is powered on.

Front Panel Introduction