dynarex Bari+Max 10403 Kullanıcı Kılavuzu - Sayfa 3

Tıbbi Ekipman dynarex Bari+Max 10403 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dynarex Bari+Max 10403 10 sayfaları. Bariatric hd full electric home care bed

Sayfayı Yazdır

• Close supervision is necessary when this product

is used by or near children or physically challenged

individuals.

• NEVER PERMIT ANYONE TO BE UNDER THE

BED OR IN BETWEEN THE RAISED BED FRAME

COMPONENTS AT ANY TIME.

• Total Weight capacity is 1000 lb. excluding additional

weight from Rails, Mattress and other accessories.

• Suggested patient weight capacity is 850 lb.

• Never permit more than one person on/in the bed at

any time.

• Body weight should be evenly distributed over the

surface of the bed. Do not lie, sit or lean in such a way

that the patient's entire body weight is placed only

on the raised head or foot sections of the bed. This

includes when repositioning or transferring in or out of

bed

• Ensure the mattress is centered on the frame. This will

minimize the risk of the occupant becoming trapped

between the mattress and any bed rail being used.

• To prevent casters from moving whenever the bed is

stationary, ensure the bed caster locks are properly

engaged.

• ALWAYS lock the caster locks when transferring into or

out of the bed. Inspect the caster locks BEFORE using

the bed to ensure the locks function adequately.

• Even with casters properly locked, some floor surfaces

will allow the bed to move under some conditions. Use

of the bed on such floor surfaces must be evaluated by

the care provider.

• The bed is not designed to be used as a patient

transport. When transporting a patient, use an

approved patient transport, otherwise injury or damage

may result.

• When operating or moving the bed, always ensure that

the individual in the bed is properly positioned within

the bed.

• DO NOT allow extremities to extend beyond the

sides or between the bed rails when performing these

functions.

• Keep the bed a minimum of 12 inches (30.48 cm) away

from any wall.

Bariatric HD Full Electric Home Care Bed (Reorder Nos. 10403 & 10405)

WARNINGS

• Be sure that the bed is free and clear of all obstructions

for full range of motion. Damage to the unit and wall

will occur if the bed contacts the wall, chair rail or other

obstruction while in motion.

• Improper use of certain bed accessories (patient

restraints, side rails, trapeze devices, etc.) can

cause patient injury or death. Consult a health care

professional or the accessory manufacturer for proper

use instructions.

• If using optional bed side rails, check to ensure they are

properly and securely installed BEFORE using the bed.

• Individuals who cannot prevent themselves from rolling/

climbing out of the bed may require alternative safe

means of restraint.

• Optional side rails are NOT intended to be used as a

restraint and may be used only if they are necessary

to treat a resident's medical symptoms, which are

documented in the resident's medical record. A

physician or healthcare professional should be

consulted for an alternative means of safe restraint.

• Replacement mattresses and bed rails with dimensions

different than the original equipment supplied or

approved may not be interchangeable. Variations in

bed side rail design, and thickness, size or density of

the mattress could lead to entrapment. Use ONLY

authorized replacement parts and accessories.

• Side rails do not fall within any weight limitations. Side

rails may become deformed or broken if excessive side

pressure is exerted.

• Do not use side rails as push handles when moving the

bed.

• Ensure that ignition sources are minimized near

combustible/explosive gases and materials.

• Do not use near explosive gases. May be a fire hazard

when used with oxygen administering equipment other

than nasal or masked type.

• Use ONLY mask or nasal type oxygen administering

equipment around the bed. The use of any other type

of oxygen administering equipment can result in a fire

hazard.

• When using nasal or masked type administering

equipment, oxygen or air tubing must be routed

and secured properly to ensure that tubing does not

become entangled and eventually severed during

normal operation of the bed.