activTek AP3000 Manuel - Sayfa 7

Hava Temizleyici activTek AP3000 için çevrimiçi göz atın veya pdf Manuel indirin. activTek AP3000 16 sayfaları. Portable whole home office system
Ayrıca activTek AP3000 için: Kullanıcı Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (12 sayfalar)

Sayfayı Yazdır

SETTINGS AND ADJUSTMENTS

AP3000 can be turned on or off using either the included remote or the control panel on the front of the unit .

NOTE:

If you are operating your central

heating and air conditioning

fan or other ventilation system

continuously, set the coverage up

to the total ventilated indoor area .

Otherwise, set the coverage up to

the size of the room . Do not exceed

the size of the ventilated indoor

area when setting the purifier level .

POWER (standby)

Turns the unit ON and OFF .

REMINDER RESET (control panel only)

Clears the maintenance reminders after performing routine maintenance .

REMOTE CONTROL FUNCTIONS

Fan Up/Fan Down

Adjusts the five speed fan .

Away Mode

When the AP3000 is switched to the "Away Mode, " the Corona Discharge Ozone Plate is operated at maximum

output, which is 125% of the 3,000 square foot setting . This mode is to be used only in unoccupied spaces; all

humans and pets should be removed from the area during operation and for one hour after treatment completes

or until the ozone has sufficiently dissipated . For optimal results, use the "Away Mode" to treat individual rooms

where the square footage is under 500 square feet, thereby allowing the ozone level to sufficiently rise to treat

the area in the 2, 4, 6 or 8 hour programmed setting .

Normal Mode

When the AP3000 is operated in the "Normal Mode, " ActivePure® (RCI) Cell produces is a low level of Hydrogen

Peroxide gas (H2O2) and Super Oxides (O2-), as well as positive and negative ionization which forms Hydroxyls . In

"Normal Mode", Ozone Free models will not produce ozone, while Standard Cell models will produce very low levels .

High Mode

When the AP3000 is switched to the "High Mode, " the Corona Discharge Ozone Plate becomes operational,

producing a low level of ozone based upon the area being treated in square feet . The AP3000 is designed to

produce . 0 3 to . 0 45 parts pe million (ppm) of ozone when the square footage setting is equal to the ventilated area .

Purifier Up/Purifier Down (High Mode only)

Works when unit is in High Mode to set the purifier level for the indoor area . The level is indicated by both a

horizontal bar graph and square footage (U . S . models) or square meters (international models) . The unit will switch

to Normal Mode, if the PURIFIER DOWN button is pressed when the square footage is set to 250 sq . ft . (23 m

Display FT2 / M2 (remote control only)

Changes the purifier coverage shown on the LCD screen from square feet to square meters .

NOTE: "Unoccupied areas" includes pets . Some pets, like humans, may experience adverse reactions from exposure to

increased levels of ozone and should not be present during Away Mode operation .

Power ON/OFF

Fan UP

Fan DOWN

Normal/High

Reminder Reset

Display FT2/M2

Purifier UP

Purifier DOWN

Away Mode ON/SET/OFF

Battery compartment

(2 AAA)

) .