DC MONT DC-MPPT-MPK2-40A Kullanıcı Kılavuzu - Sayfa 4
Kontrolör DC MONT DC-MPPT-MPK2-40A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DC MONT DC-MPPT-MPK2-40A 17 sayfaları. Mppt controller
Sayfayı Yazdır
MONT
INSTALLATION
Choose a mounting location on a vertical surface which should be protected from direct sunlight,
high temperatures, and water. Make sure there is good ventilation.
Verify that there is sufficient room to run wires, as well as clearance above and below the controller
for ventilation. The clearance should be at least 6 inches (150mm).
Secure the controller on the mounting location.
Switch off the air switch or fuse of the battery, solar panel and load.
Connect the battery to the battery terminals on the controller.
Connect the solar panel to the solar panel terminals on the controller.
Connect the load to the load terminals on the controller.
Switch on the fuse of the battery first, then the air switch of the solar panel, finally the fuse of the load.
Remote
Temperature
Sensor
BLUE TOOTH
Air-switch
Fuse
Fuse
12V Battery