dynarex DynaRide 10220 Manuel - Sayfa 2

Tekerlekli Sandalye dynarex DynaRide 10220 için çevrimiçi göz atın veya pdf Manuel indirin. dynarex DynaRide 10220 6 sayfaları.

Sayfayı Yazdır

TO OPEN CHAIR

Open wheelchair by tilting to

one side and pushing down on

seat rail until fully opened.

BACK WHEELS

at least once a month to ensure proper tightness. If wheel

wobbles or is loose, release lock nut and tighten axle bolt

slightly. Test for proper tightness by leaning chair to one

side and spinning adjusted wheel.

TIRES

Solid rubber tires need minimal maintenance, but

should be cleaned occasionally with a damp cloth. Replace

if tires become severely worn or cracking appears.

WHEEL LOCKS

in or out of chair, leaning forward in chair, or while in an

elevator or wheelchair lift. Locks

are engaged by pushing handle

completely forward. Adjustments

to locks are made by loosening

or tightening nut on the carriage

bolt. Wheel lock shoe should be

embedded at least ⅛". Adjust by

sliding clamp toward rear wheel

while handle is engaged in

locked position. Tighten nut and

bolt to secure in position. Test for

correct locking action before

actual use.

FRONT CASTERS

and lubricated occasionally. Lubricate by removing fork and

greasing caster stem bearings and wheel bearings.

USE AND SAFETY

TO CLOSE CHAIR

First fold foot plates to vertical

position. Grab seat with both

hands at front and back edge and

lift. Or, tilt chair to one side and lift

up on seat rail.

Large rear wheels should be inspected

Engage both wheel locks before getting

Casters should be checked periodically

Carriage Bolt

and Nut

Mounting

Positions

Rear Wheel

Handle

Wheel Lock

Shoe