Autonics PSAN Series Manuel - Sayfa 5

Güvenlik Sensörleri Autonics PSAN Series için çevrimiçi göz atın veya pdf Manuel indirin. Autonics PSAN Series 13 sayfaları. Display type pressure sensors
Ayrıca Autonics PSAN Series için: Manuel (2 sayfalar), Ürün Kılavuzu (6 sayfalar), Ürün Kılavuzu (7 sayfalar)

Sayfayı Yazdır

PSAN Series

Control output diagram

Analog output (Voltage output PSAN-

● NPN open collector output type

Over current

protection

circuit

Over current

protection

circuit

1kΩ

※ In case of analog voltage output type models short-circuit protection is not embodied. (

Do not connect with power source or load directly.

※ Be careful with input impedance of connecting devices when using analog voltage output type models.

※ Be careful with voltage drop due to cable resistance when extending sensor cable.

Hold/Auto shift input (PSAN-

● NPN open collector output type

Over current

protection

circuit

Over current

protection

circuit

Front panel identification and function

Setting

Press

key

Parameter

over 3sec.

setting

Preset value

setting

Press

key

Forced output

control mode

setting

Press

key

Peak hold

over 3sec.

Press

Zero-point

keys over 1sec.

adjustment

E-8

(Brown)+V

Load

(Black)OUT1

Load

(White)OUT2

12-24VDC

(Orange)

Analog output

voltage/current

0V(Blue)

(Brown)+V

Load

(Black)OUT1

Load

(White)OUT2

12-24VDC

(Orange)

Hold/Auto shift

input

0V(Blue)

1. Range of rated pressure : It is possible to change the pressure unit in Pressure sensor.

2. 4digit LED display(Red) : sed to indicate measured pressure value, setting value and error

3. Output1 indicator(Red) : Output 1 is ON, LED will be ON.

4. Output2 indicator(Green) : Output 2 is ON, LED will be ON.

key : Used to enter into Preset/Parameter setting mode and to save Setting mode.

key : Used to set parameter and preset, peak value check mode, function setting or output

operation mode.

key : Used for zero point adjustment function by pressing

simultaneously in RUN mode.

Pressure

Output operation

unit setting

mode setting

Detection level 1 setting (out1)

The forced output control mode is applied with pressign

mode( fOUT ) in output operation mode( OUtM ) parameter. For more detailed information, refer to '● Forced

output control mode' '

High peak

value check

Zero-point adjustment

V- , Current output PSAN-

● PNP open collector output type

Over current

protection

circuit

Over current

protection

circuit

1kΩ

H-

type)

● PNP open collector output type

Over current

protection

circuit

Over current

protection

circuit

Please use different unit as label for your application.

message.

Output

Response

type setting

time setting

Detection level 2 setting (out2)

Output operation mode'

Low peak

value check

(In case of Hold/Auto shift input type model)

(Brown)+V

(Black)OUT1

(White)OUT2

(Orange)

Analog output

voltage/current

0V(Blue)

: For voltage output type only.)

(Brown)+V

(Black)OUT1

(White)OUT2

(Orange)

Hold/Auto shift

input

0V(Blue)

Analog output scale and

Hold/Auto Shift input setting

key after selecting forced output control

Auto shift input setting

A-

type)

12-24VDC

Load

12-24VDC

Load

keys over 1 sec.

Key lock

setting